Uniden TRU446-2 English Owners Manual - Page 43

Register the Security Code 1) Unplug the AC adapter. 2) Press and hold find handset on the base while you plug in the AC Adapter until the status LED on the base flashes. 3) Press talk/flash. "Handset Registering" appears. When the operation is finished "Registration Complete" appears and the status LED is turned Off. You will hear a confirmation tone and the phone returns to the standby mode. • You must complete the registration operation within 30 seconds, or the phone returns to standby mode. • During the registration operation, you cannot receive an incoming call, page, or make a call. Installing the Beltclip To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Headset Installation Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See Page 9.) A D D I T I O N A L I N F O R M A T I O N [ 41 ] ADDITIONAL INFORMATION