Uniden TRU446-2 English Owners Manual - Page 7
Install The Handset Battery, Plug Into Ac Power, Connect To A Phone Line, To Select Caller Id - manual
UPC - 050633201084
View all Uniden TRU446-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
QUICK REFERENCE GUIDE Step 1Charging the Battery INSTALL THE HANDSET BATTERY Remove the cover. Connect the battery pack connector with the correct polarity. Replace the cover. Step 2 Connecting CONNECT TO A PHONE LINE When the handset battery pack is fully charged, plug the telephone cord into the base unit and then into a telephone wall jack. Your phone is set for tone dialing. If your local network requires pulse dialing, please see "Setting up the phone, Choose the dialing mode" in your owner's manual. TO SELECT CALLER ID OPTIONS Press menu/mute. Press + or - to move the pointer to "Caller ID Setup", then press select/ch. Press + or - to move the pointer to an option, then press select/ch. Press + or - to change the option setting. Press select/ch and return the handset to the base. PLUG INTO AC POWER Plug the AC adapter cord into the base unit and then to a 120V AC outlet. Step 3 Setting up the Caller ID Options/Language TO CHOOSE THE LANGUAGE Press menu/mute. Press + or - to move the pointer to "Language", then press select/ch. Press + or - to change the option setting. Place the handset in the base . Note: You must charge the battery pack continuous for 15-20 hours before using the phone. Note: Three Caller ID options are available: Auto Talk, Caller ID on Call Waiting (CIDCW) and Area Code. Press select/ch and return the handset to the base. QUICK REFERENCE GUIDE [ 5 ]