Uniden TRU9380-4 English Owners Manual - Page 40
Seven-Digit Dialing, Using the Intercom, Making an Intercom
UPC - 050633260937
View all Uniden TRU9380-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Seven-Digit Dialing In some areas, the telephone company may allow you to place a local call by dialing only 7 digits (instead of 10). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller's 7-digit phone number which will allow you to easily return the local call without modifying the number before dialing. If you get a call from outside your area code, you will see all 10 digits. To program your local area code: ) Press [menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu. 2) Use the number keypad ([0] through [9]) to enter a 3-digit area code. If an area code has already been stored, it appears in the display. Press [menu/clear] to delete the stored code, and then enter a new one. 3) Press [select/ ]. You will hear a confirmation tone. Using the Intercom You can use the intercom to talk to another handset without using the phone line. Making an Intercom Page From the handset: ) With the phone in standby, press [hold/int'com/xfer]. 2) Use [ ] or [ ] to select the handset you want to talk with, then press [select/ handset. 3) To cancel the intercom page, press [ ]. ]. Select ALL to page all other Note: Intercom paging will be cancelled if any of the following things occur: • You receive an outside call or an intercom page while selecting the other handset. • You do not select a handset within 30 seconds. • The party does not answer the page within one minute. • The party is busy. • The party is out of range (UNAVAILABLE appears in the display). 39