Uniden WHAMx4 English Owners Manual - Page 14
Basic Operation
UPC - 050633500781
View all Uniden WHAMx4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Basic Operation BTuarnsiincgOthpeeMriactroiopnhone On and Off Hold down POWER/VOLUME for about 2 seconds. If the main radio is turned on, the channel that appears on the microphone is the channel currently selected on the main radio. Hold down POWER/VOLUME for about 2 seconds again to turn off the microphone. Setting the Base/Microphone ID You must set the microphone ID to the same setting as your radio's base ID so the microphone and radio can communicate with each other. If you set the ID correctly, you see similar information on both the radio's and microphone's display. 1. To set the base or microphone ID briefly press MENU, repeatedly press or until LOCAL MENU appears, then press SELECT/SCRAM. 2. Repeatedly press or until ID SETTING appears, then press SELECT/SCRAM. 3. Repeatedly press or to select the ID you want to set (BASE ID or HANDSET ID). Then press SELECT/SCRAM. 4. Repeatedly press or to select the ID you want (00-99 for BASE ID or 1-4 for HANDSET ID). Then press SELECT/SCRAM. Adjusting the Volume and Squelch Briefly press POWER/VOLUME, then repeatedly press to turn up the volume or to turn it down. Briefly press POWER/VOLUME to turn off volume mode. To adjust the squelch, briefly press SQUELCH/BATTERY, then repeatedly press to turn up the squelch or to turn it down. Briefly press PTT, 16/9/TRIPLE WATCH, or DISTRESS to turn off squelch mode. Checking the Battery Level Hold down SQUELCH/BATTERY for about 2 seconds. A number from 0-4 (0 is low, and 4 is full) appears showing the battery level. If 0 appears, the radio does not have enough battery power to operate. Briefly press any key to turn off battery mode. 14 Basic Operation