Via EPIA-5000 User Manual - Page 40
Boot Other Device, Boot Up NumLock Status, Gate A20 Option, Typematic Rate Setting, Typematic Rate - usb boot
View all Via EPIA-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
BIOS Setup LS120 HDD-0 SCSI CD-ROM HDD-1 HDD-2 HDD-3 ZIP100 USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled The system will boot from LS-120 drive. The system will boot from first HDD. The system will boot from SCSI. The system will boot from CD-ROM. The system will boot from second HDD. The system will boot from third HDD. The system will boot from fourth HDD. The system will boot from ATAPI ZIP drive. The system will boot from USB floppy drive. The system will boot from USB ZIP drive. The system will boot from USB CD-ROM. The system will boot from USB HDD drive. The system will boot from network drive. Disable this sequence. Boot Other Device Enable the system to boot from other devices if the system fails to boot from the First/Second/Third boot device. Settings: Enabled and Disabled. Boot Up NumLock Status Set the NumLock status when the system is powered on. "On" will turn key pad into number keys, and "Off" will turn key pad into arrow keys. Settings: On and Off. Gate A20 Option Set the Gate A20 option. Settings: Normal and Fast. Typematic Rate Setting Set the typematic rate and delay. Settings: Enabled and Disabled. Typematic Rate (Chars/Sec) When Typematic Rate Setting is enabled. This item allows you to set the rate (characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12, 15, 20, 24 and 30. Typematic Delay (Msec) When Typematic Rate Setting is enabled. This item allows you to select the delay between when the key was first pressed and when the acceleration begins. Settings: 250, 500, 750 and 1000. 3-9