Via EPIA-5000 User Manual - Page 63
Set Supervisor/User Password - clear password
View all Via EPIA-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 3 Set Supervisor/User Password When you select this function, a message as below will appear on the screen: Type the password, up to eight characters in length, and press . The password typed now will clear any previously set password from CMOS memory. You will be prompted to confirm the password. Re-type the password and press . You may also press to abort the selection and not enter a password. To clear a set password, just press when you are prompted to enter the password. A message will show up confirming that the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup without entering any password. When a password has been set, you will be prompted to enter it every time you try to enter Setup. This prevents an unauthorized person from changing any part of your system configuration. Additionally, when a password is enabled, you can also have BIOS to request a password each time the system is booted. This would prevent unauthorized use of your computer. The setting to determine when the password prompt is required is the Security Option of the Advanced BIOS Features menu. If the Security Option is set to System, the password is required both at boot and at entry to 3-32