Via EPIA-CN10000EG User Manual - Page 51
SATA Mode, AC'97 Audio, VIA OnChip LAN, Onboard Lan Boot ROM, OnChip USB Controller, OnChip EHCI
View all Via EPIA-CN10000EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
BIOS Setup SATA Mode Serial ATA is the latest generation of the ATA interface. Serial ATA hard drives deliver transfer speeds of up to 150MB/sec. Setting IDE RAID Description Supports two SATA plus two PATA hard disk drives Only SATA supports RAID AC'97 Audio Auto allows the mainboard to detect whether an audio device is used. If the device is detected, the onboard VIA AC'97 (Audio Codec'97) controller will be enabled; otherwise, it is disabled. Disable the controller if another controller card is being used to connect to an audio device. Setting Auto Disabled Description Enables onboard controller if audio device is detected Turn off onboard controller to allow external controller VIA OnChip LAN Settings: [Enabled, Disabled] Onboard Lan Boot ROM Settings: [Enabled, Disabled] OnChip USB Controller Settings: [All Disabled, All Enabled, 1&2 USB Port, 2&3 USB Port, 1&3 USB Port, 1 USB Port, 2 USB Port, 3 USB Port] OnChip EHCI Controller Settings: [Enabled, Disabled] USB Emulation Set this field to choose the USB emulation. When set to "OFF ", do not support any USB device on DOS. When set to "KB/MS", support USB legacy keyboard and mouse, no support USB storage. And set to "ON", support USB legacy keyboard, mouse and storage. Settings: [OFF, KB/MS, ON] 43