Via EPIA-CN10000EG User Manual - Page 58
Primary INTR, IRQ3~IRQ15
View all Via EPIA-CN10000EG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 3 IRQS ACTIVITIES Primary INTR IRQ3 (Reserved) IRQ4 (COM 1) IRQ5 (Reserved) IRQ6 (Reserved) IRQ7 (Reserved) IRQ8 (RTC Alarm) IRQ9 (IRQ2 Redir) IRQ10 (Reserved) IRQ11 (Reserved) IRQ12 (PS/2 Mouse) IRQ13 (Coprocessor) IRQ14 (Hard Disk) IRQ15 (Reserved) Phoenix - AwardBIOS CMOS Setup Utility IRQs Activities [ON] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Enabled] [Enabled] [Disabled] Item Help Menu Level If you choose Disabled, the power management unit will not monitor any IRQ activities. : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General F7: Optimized Defaults Help Primary INTR Restores the system to an active state if IRQ activity is detected from any of the enabled channels. Settings: [Off, On] IRQ3~IRQ15 Enables or disables the monitoring of the specified IRQ line. These fields are only available if "Primary INTR" is on. Settings: [Enabled, Disabled] NOTE: IRQ (Interrupt Request) lines are system resources allocated to I/O devices. When an I/O device needs to gain attention of the operating system, it signals this by causing an IRQ to occur. After receiving the signal, when the operating system is ready, the system will interrupt itself and perform the service required by the IO device. 50