Via EPIA ME6000 User Manual - Page 17
Memory Module Installation - epia mini itx
View all Via EPIA ME6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2 Memory Module Installation The VIA EPIA-M Mini-ITX Mainboard provides one 184-pin DIMM slot for DDR266 SDRAM memory modules. DDR SDRAM Module Installation Procedures 1. Push the white retaining latches at either end of the DIMM slot outwards. 2. Align the DDR SDRAM module with the corresponding notches on the DIMM slot. The modules will only fit if placed in the correct position. 3. With both hands, press the DDR SDRAM module down into the DIMM slot so that the white retaining latches rotate up and secure the module in place (see picture below). 2-4
Chapter 2
2-4
Memory Module Installation
The VIA EPIA-M Mini-ITX Mainboard provides one 184-pin DIMM slot
for DDR266 SDRAM memory modules.
DDR SDRAM Module Installation Procedures
1.
Push the white retaining latches at either end of the DIMM slot outwards.
2.
Align the DDR SDRAM module with the corresponding notches on the
DIMM slot. The modules will only fit if placed in the correct position.
3.
With both hands, press the DDR SDRAM module down into the DIMM
slot so that the white retaining latches rotate up and secure the module in
place (see picture below).