Via EPIA ME6000 User Manual - Page 43
Boot Up NumLock Status, Typematic Rate Setting, Typematic Rate Chars/Sec, Typematic Delay Msec,
View all Via EPIA ME6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Boot Up NumLock Status Set the NumLock status when the system is powered on. On will turn key pad into number keys, and Off will turn key pad into arrow keys. Settings: On and Off Typematic Rate Setting When Enabled, you can set the Typematic Rate and Typematic Delay. Settings: Enabled and Disabled Typematic Rate (Chars/Sec) When Typematic Rate Setting is enabled, this item allows you to set the rate (characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12, 15, 20, 24 and 30 Typematic Delay (Msec) When Typematic Rate Setting is enabled, this item allows you to select the delay between when the key was first pressed and when the acceleration begins. Settings: 250, 500, 750 and 1000 Security Option If you have set a password, select whether the password is required every time the System boots, or only when you enter Setup. Settings are described below: Setup The password prompt appears only when end users try to run Setup. System A password prompt appears every time when the computer is powered on or when end users try to run Setup. Display Full Screen Logo Show full screen logo during BIOS bootup process. Settings: Enabled and Disabled 3-10