Via M-700-10E User Manual - Page 26

EPIA-M700 User's Manual Jumpers The mainboard provides jumpers for setting some mainboard functions. This section will explain how to change the settings of the mainboard functions using the jumpers. Clear CMOS Connector: CLEAR_CMOS1 The onboard CMOS RAM stores system configuration data and has an onboard battery power supply. To reset the CMOS settings, set the jumper on pins 1 and 2 while the system is off. Return the jumper to pins 2 and 3 afterwards. Setting the jumper while the system is on will damage the mainboard. Setting 12 3 Normal Operation ON ON OFF Clear CMOS setting OFF ON ON Normal Clear Caution: Except when clearing the RTC RAM, never remove the cap on CLEAR_CMOS jumper default position. Removing the cap will cause system boot failure. Avoid clearing the CMOS while the system is on; it will damage the mainboard. MS_CF_SEL This jumper determines the working state of the CF connector. The default value is Master. Setting 123 Slave Slave ON ON OFF Master Master OFF ON ON Voltage Selector for the CF Connector: V_CF_SEL This VCC selector jumper is to determine the input voltage of the CF connector. The default value is +3.3V. Setting 123 +3.3V +5V +3.3V ON ON OFF +5V OFF ON ON 18