ViewSonic LS560WH User Guide English - Page 34
Correcting Keystone, To correct this, besides adjusting the height of the projector, you may also
View all ViewSonic LS560WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Correcting Keystone Keystoning refers to the situation where the projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you may also: Perform automatic keystone correction by enabling the Auto V Keystone function. (only available for LS560W/LS560WH/LS560HDH) Or manually correct keystone following the below steps: 1. Use the keystone keys on the projector or remote control to display the keystone page. 2. After the keystone page is displayed, press to correct keystoning at the top of the image. Press to correct keystoning at the bottom of the image. Press to correct keystoning at the bottom of the image. Press to correct keystoning at the right side of the image. Press to correct keystoning at the left side of the image. LS560W / LS560WH / LS560HDH ENTER LS510W / LS510WH / LS510WH-2 34