ViewSonic LS560WH User Guide English - Page 36

Controlling the Projector through a LAN Environment, Configuring the LAN Control Settings, ADVANCED

Page 36 highlights

Controlling the Projector through a LAN Environment NOTE: This function is only available for LS560W/LS560WH/LS510WH-2. The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. LS560W LS560WH LS510WH-2 Configuring the LAN Control Settings • If you are in a DHCP environment: 1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port. 2. Open the OSD menu and go to the ADVANCED > LAN Control Settings menu. Press Enter to display the LAN Control Settings page. Or you can press Network to open the LAN Control Settings menu directly. 3. Highlight LAN Settings and press / to select DHCP ON. 4. Press to highlight Apply and press Enter. 5. Please wait for around 15 - 20 seconds, and then re-enter the LAN Settings page. The Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be displayed. Make note of the IP address displayed in the Projector IP Address row. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85

36
Controlling the Projector through a LAN Environment
NOTE:
This func°on is only available for LS560W/LS560WH/LS510WH-2.
The projector supports Crestron® software. With correct settings for the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same
local area network.
LS560WH
LS560W
LS510WH-2
Configuring the LAN Control Settings
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port.
2.
Open the OSD menu and go to the
ADVANCED
>
LAN Control Settings
menu.
Press
Enter
to display the
LAN Control Settings
page. Or you can press
Network
to open the
LAN Control Settings
menu directly.
3.
Highlight
LAN Settings
and press
/
to select
DHCP ON
.
4.
Press
to highlight
Apply
and press
Enter
.
5.
Please wait for around 15 - 20 seconds, and then re-enter the
LAN Settings
page. The
Projector IP Address
,
Subnet Mask
,
Default Gateway
,
DNS Server
se²ngs will be displayed. Make note of the IP address displayed in the
Projector IP Address
row.