ViewSonic LS751HD User Guide English - Page 27
Mounting the Projector, Using the Security Bar
View all ViewSonic LS751HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Mounting the Projector NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach the mount to the projector meet the following specifications: • Screw type: M4 x 10 • Maximum Screw Length: 10 mm # Security Bar CAUTION: • Avoid installing the projector near a heat source or air conditioner. • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector. Using the Security Bar To help prevent the projector from being stolen, use a security slot locking device to secure the projector to a fixed object. 27
27
Moun°ng the Projector
NOTE:
If you buy a third party mount, please use the correct screw size. Screw
size can vary depending on the thickness of the moun°ng plate.
1.
To ensure the most secure installa°on, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to a±ach the mount to the projector meet the following
specifica°ons:
• Screw type: M4 x 10
• Maximum Screw Length: 10 mm
B
CAUTION:
•
Avoid installing the projector near a heat source or air condi°oner.
•
Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bo±om of
the projector.
Using the Security Bar
To help prevent the projector from being stolen, use a security slot locking device to
secure the projector to a fixed object.
Security Bar