ViewSonic PA503W PA503S User Guide English - Page 30
Using Screen Color, Fine-tuning the image quality in user modes
View all ViewSonic PA503W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
• Press Color Mode to display the selection bar and press / to select a desired mode or press Color Mode repeatedly. • Go to the IMAGE > Color Mode menu and press Enter. Press / to select a desired mode. Picture modes for different types of signals The picture modes available for different types of signals are listed below. 1. Brightest mode: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. 2. Presentation mode: Is designed for presentations under daylight environment to match PC and notebook coloring. 3. Standard mode: Is designed for normal circumstances under daylight environment. 4. Photo mode: Is designed for photo viewing. 5. Movie mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment. Using Screen Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Screen Color feature can help correct the projected picture's colors to prevent possible color difference between the source and projected pictures. To use this function, go to the DISPLAY > Screen Color menu and press Enter. Press / to select a color which is closest to the color of the projection surface. There are several precalibrated colors to choose from: Whiteboard, Greenboard, and Blackboard. The effects of these settings may vary depending on different models. This function is only available when a computer input signal is selected. Fine-tuning the image quality in user modes According to the detected signal type, there are some user-definable functions available. You can make adjustments to these functions based on your needs. Adjusting Brightness Go to the IMAGE > Brightness menu and press Enter. The higher the value, the brighter the image. And the lower the setting, the darker the image. Adjust this control so the black areas of the image appear just as black and that detail in the dark areas is visible. -30 50 +80 Adjusting Contrast Go to the IMAGE > Contrast menu and press Enter. The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment. -30 0 +40 Adjusting Color Go to the IMAGE > Advanced > Color menu and press / . 25