ViewSonic PA505W PA505W User Guide English - Page 32
Fine-tuning the image clarity, Correcting keystone, Magnifying and searching for details
View all ViewSonic PA505W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Fine-tuning the image clarity 1. Adjust the projected image to the size 2. If necessary, sharpen the image by rotating that you need using the zoom ring. the focus ring. Correcting keystone Keystoning refers to the situation where the projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control 1. Press / to display the Keystone correction page. 2. Press to correct keystoning at the top of Press / the image. Press to correct keystoning at the bottom of the image. • Using the OSD menu Press / 1. Open the OSD menu and go to the DISPLAY > Keystone menu. 2. Press Enter. The Keystone correction page is displayed. 3. Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image. Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control • Press remote control ( and ) for screen zoom in or zoom out • Using the OSD menu 1. Open the OSD menu and go to the DISPLAY > Zoom menu. 2. Press Enter. The Zoom bar is displayed. 3. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 4. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press repeatedly until it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details. 27