ViewSonic PA505W PA505W User Guide English - Page 41
Using the projector in standby mode, Adjusting the sound, Turning off the Power On/Off Ring Tone
View all ViewSonic PA505W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under POWER MANAGEMENT > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN socket is correctly connected to a proper device. Active VGA Out Selecting On in the POWER MANAGEMENT > Standby Settings > Active VGA Out outputs a VGA signal when the COMPUTER IN 1 and MONITOR OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 17 for more details. Muting the sound 1. Open the OSD menu and go to the BASIC > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press or on the remote control to adjust the projector's sound level. Turning off the Power On/Off Ring Tone 1. Open the OSD menu and go to the BASIC > Audio Settings > Power On/Off Ring Tone menu. 2. Press / to select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone. 36