ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom - Page 36
Adjusting 4 corners, Hiding the Image, Enter
View all ViewSonic PG707X - 4000 Lumens XGA Networkable Projector with 1.3x Optical Zoom and Low Input Lag manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Adjusting 4 corners You can manually adjust the shape and size of an image that is unevenly rectangular on all sides. 1. To display the Corner Adj. page, you can do one of the followings: • Press Enter. • Open the OSD menu and go to the DISPLAY > Corner Adj. menu and press Enter. 2. Use / / / to select the corner you wish to adjust and press Enter. 3. Use / to select an adjustment method that suits your need and press Enter. 4. As indicated on the screen ( / for a 45-degree angle adjustment and / / / for a 90-degree angle adjustment), press / / / to adjust its shape and size. You can press Menu or Exit to go back to a previous step. A long press for 2 seconds on Enter will reset the settings on the corner that you chose. NOTE: • Adjusting keystone will reset the Corner Adj. settings. • After the Corner Adj. settings have been modified, some aspect ratios or timings are not available. When that happens, reset the settings on all 4 corners. Hiding the Image In order to draw the audience's full attention to the presenter, you can press Blank on the projector or remote control to hide the screen image. Press any key on the projector or remote control to restore the image. CAUTION: Do not block the projection lens as this could cause the blocking object to become heated and deformed or even cause a fire. 36