ViewSonic PJ106D User Manual - Page 34
Images aren't projected correctly.
View all ViewSonic PJ106D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Problem "Searching for source" is displayed. Cause and solution Turn on the power of the connected device, or check whether there is something wrong with the connected device. Check the external device outputs signals. (Check this especially when the external device is a notebook computer.) Check that the cable connected to the external device isn't defective. Check that the projector is connected to the external device using the correct terminals. Check that the connected device is correctly selected as the input source. When an extension cord is being used, replace it with the supplied cable and check whether images are projected correctly. Images aren't projected correctly. Problem Cause and solution Projected images are shaking. Projected images are displaced. Check that the cable connected to the external device isn't intermittent. Connect the cable's plug with the external device's connector firmly. Some computers output out-of-spec signals on rare occasion. Adjust the Image menu. Projected images are distorted. Projected images are dark. Projected images are blurred. Adjust the projector and the screen so that they are perpendicular to each other. Adjust Brightness in the Color menu. Adjust the focus. Clean the lens. Adjust Brightness and Contrast in the Color menu. Adjust the projector and the screen so that they are perpendicular to each other. ViewSonic PJ106D 29