Home » ViewSonic Manuals » Projectors » ViewSonic PJ557D » Manual Viewer

ViewSonic PJ557D User Manual

ViewSonic PJ557D - XGA DLP Projector Manual

UPC - 766907283310

View all ViewSonic PJ557D manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ557D manual content summary:

ViewSonic PJ557D | User Manual - Page 1
ViewSonic® PJ557DC/PJ559DC/PJ560DC DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your
ViewSonic PJ557D | User Manual - Page 2
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference ViewSonic PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 3
guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the obsolete moisture, or if the unit does not operate normally or has been dropped. ViewSonic ii PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 4
in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead). 4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii
ViewSonic PJ557D | User Manual - Page 5
: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJ557DC/PJ559DC/PJ560DC ViewSonic DLP Projector VS11949/VS11986/VS11990 PJ557DC_PJ559DC_PJ560DC_UG_ENG Rev. 1B 12-24-07 The lamp in this product contains mercury. Please dispose of in accordance with local, state or
ViewSonic PJ557D | User Manual - Page 6
...18 Cleaning the Projector Housing 18 Cleaning the Air Filter 18 Replacing the Lamp 19 Specifications 21 Appendix 22 LED Indicator Messages 22 Compatibility Modes 23 Troubleshooting ...24 Customer Support ...25 Limited Warranty ...26 Mexico Limited Warranty 28 ViewSonic PJ557DC/PJ559DC
ViewSonic PJ557D | User Manual - Page 7
projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: „ Single chip 0.55" Texas Instruments DLP® technology „ XGA plug to prevent signal interference due to voltage fluctuations. ViewSonic Ground 1 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 8
Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) Composite Video Cable S-Video Cable Remote Control (IR) AAA size batteries for remote control User's Manual Quick Start Guide Projector Carrying Case „ Save the original shipping carton and packing material; they will comein handy if you
ViewSonic PJ557D | User Manual - Page 9
Front View 9 12 11 10 9 8 1 2 3 45 6 7 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes 7 Air filter cover 8 AC power socket 9 Speaker 10 Control panel 11 Zoom ring 12 Focus ring 13 Lamp cover ViewSonic 3 PJ557DC
ViewSonic PJ557D | User Manual - Page 10
ports 2 Kensington lock 3 Rear IR remote control sensor 4 Ventilation holes Bottom View 1 2 3 1 Elevator foot 2 Ceiling mount 3 Tilt-adjustment foot „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic 4 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 11
Setting, Lamp Counter Reset and Factory Default menu operations. 5 Resync Resynchronize the projector to the input signal from a computer. 6 Power Turn the projector on or off. 7 Menu Display or exit the on-screen display menus. 8 Source Manually select an input source. ViewSonic 5 PJ557DC
ViewSonic PJ557D | User Manual - Page 12
the projector via a computer, connect this to the controlling computer's RS-232C port. 7 S-Video Connect S-Video output from video equipment to this jack. 8 Video Connect composite video output from video equipment to this jack. 9 SERVICE This connector is for firmware update. ViewSonic 6 PJ557DC
ViewSonic PJ557D | User Manual - Page 13
Remote Control 1 Power Turn the projector on or off. 2 Four directional buttons -Use four between 3 and 10. 8 Source Manually select an input source. 9 Right (Computer mode only) Act as mouse right button. This function is only available when the projector is connected to a computer via
ViewSonic PJ557D | User Manual - Page 14
of the used batteries along with household waste. Dispose of used batteries according to local regulations. „ Danger of explosion may happen if batteries are incorrectly replaced. Replace only with the same type recommended by the manufacturer. ViewSonic 8 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 15
or other strong light such as a fluorescent lamp shining on the remote sensor. „ Operate the remote control from a position where the remote sensor is visible. „ Do not drop the remote control or jolt it. „ Keep the remote control out of locations with excessively high temperature or humidity. „ Do
ViewSonic PJ557D | User Manual - Page 16
1 3 4 1 25 5 67 „ When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. „ The figure above is a sample cables that come with the projector may differ from the above illustration. The included cables are based on actual
ViewSonic PJ557D | User Manual - Page 17
button again to confirm. „ The cooling fans continue to operate for cooling cycle. „ When the Lamp LED begins flashing, the projector has entered stand-by mode. „ If you want to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered stand-by
ViewSonic PJ557D | User Manual - Page 18
the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment. 2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height. „ To avoid damaging the projector, make sure that the elevator foot and tilt- adjustment foot are
ViewSonic PJ557D | User Manual - Page 19
; other positions can cause heat build-up and damage to the projector. „ Make sure the heat ventilation holes are not blocked. „ Do not use the projector in a smoky environment. Smoke residue may cause build-up on critical parts (i.e. DMD, lens assembly, etc.) ViewSonic 13 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 20
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. High ViewSonic 14 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 21
on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Picture (Computer / Video Mode) Brightness Brighten or darken the image. Contrast Set the difference between light and dark areas. Color Setting Adjust the color temperature. At higher
ViewSonic PJ557D | User Manual - Page 22
value, dark scenery will look brighter. Computer Image (Computer Mode) Frequency Adjust the timing of the projector relative to the computer. Tracking Adjust the phase of the projector signals Lamp Counter Display the lamp's elapsed operating time (in hours). ViewSonic 16 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 23
Lamp Counter Reset Reset the lamp counter to 0 hours. Power Saving If no operation is performed for a specific period of time, the power to the projector is automatically turned off. Auto Source Automatically scan the input source. ECO Mode Use this function to dim the projector lamp light output
ViewSonic PJ557D | User Manual - Page 24
equipment. „ If the dirt is difficult to remove or if the filter is torn, replace it. 4. Replace the filter. 5. Attach the air filter cover. 6. Plug the power back into the projector. „ Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work
ViewSonic PJ557D | User Manual - Page 25
displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp becomes high temperature after turning off the projector with the power button. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least
ViewSonic PJ557D | User Manual - Page 26
out the module. 6. Insert the new lamp module into the projector and tighten the screws. 7. Replace the lamp cover and tighten the screw. 8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp. 9. Reset the lamp hour. Refer to the "Setting" menu
ViewSonic PJ557D | User Manual - Page 27
Specifications Display Type Single 0.55" DLP panel Resolution (Pixels) XGA (1024 × 768) Lens Manual Zoom (1.1x) Contrast Ratio 2000:1 Screen Size 30" - 250" Lamp PJ557DC: 180W; PJ559DC: 200W; PJ560DC: 260W Input / Output Source D-Sub 15 pin, S-video, composite video, USB, RS-232, Audio
ViewSonic PJ557D | User Manual - Page 28
LED TEMP LED LAMP LED TEMP LED LAMP LED TEMP LED Color Green Off Green Green Green Green Amber Green Amber Amber Green Red Amber Off Status Flash Solid Flash Solid Solid Solid Solid Solid Solid Solid Flash Solid - Meaning The projector is in standby mode. The projector system has some problems
ViewSonic PJ557D | User Manual - Page 29
Compatibility Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 800 x 600 XGA SXGA WXGA 1024 x 768 1152 x 864 1280 x 960 1280 x 1024 1280 x 768 1280 x 33.8 kHz 28.1 kHz Vertical Frequency (Hz) 60 Hz 60 Hz 50 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz ViewSonic 23 PJ557DC/PJ559DC/PJ560DC
ViewSonic PJ557D | User Manual - Page 30
Troubleshooting Refer to the symptoms and measures listed below before sending the projector forrepairs. If the problem persists, contact your local reseller or service center. Please refer to "Indicator Messages" as well. Start-up problems If no lights turn on: „ Be sure that the power cord is
ViewSonic PJ557D | User Manual - Page 31
866-379-1304 (Spanish) F= 1-909-468-1202 [email protected] [email protected] Singapore/Malaysia/Thailand www.ap.viewsonic.com T= 65 6461 6044 [email protected] South Africa www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm United Kingdom United States
ViewSonic PJ557D | User Manual - Page 32
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem
ViewSonic PJ557D | User Manual - Page 33
of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be users in Europe and Russia, full details of warranty provided can be found in www. viewsoniceurope.com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic
ViewSonic PJ557D | User Manual - Page 34
period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number
ViewSonic PJ557D | User Manual - Page 35
39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. STD Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 381 Brea Canyon Road, Walnut, CA. 91789 USA Tel: 800-688-
ViewSonic PJ557D | User Manual - Page 36