ViewSonic PJD5153 PJD5153 User Guide English

ViewSonic PJD5153 Manual

Get ViewSonic PJD5153 PDF manuals and user guides View all ViewSonic PJD5153 manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD5153 manual content summary:

  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 1
    /PJD5155/ PJD5250/PJD5253/PJD5255/ PJD5555w_Tiger DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 2
    exceeding the world's expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well. Once again, thank you
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 3
    , including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 4
    . (2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp. (3) Long length (＞1,500 mm): maximum 13 mg per lamp. 2. Lead in glass of cathode ray tubes. 3. Lead in glass of fluorescent tubes not exceeding 0.2% by weight. 4. Lead as an alloying element in aluminium containing up to 0.4% lead
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 5
    the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 6
    damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice. No part of
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 7
    information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records PJD5151/PJD5153/PJD5155/PJD5250/PJD5253/ PJD5255/PJD5555w ViewSonic DLP Projector VS15871/VS15872/VS15873/VS15874/VS14115/ VS15875
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 8
    36 Menu operation 37 Maintenance 46 Care of the projector 46 Using the dust filter (optional accessory 47 Lamp information 48 Troubleshooting 52 Specifications 53 Projector specifications 53 Dimensions 55 Ceiling mount installation 55 Timing chart 56 Copyright information...60 Appendix
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 9
    turn off the lamp, press BLANK on the projector or remote control. 7. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 10
    transporting or installation. It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 11
    connected to the HDMI input of the projector The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance. The lamp brightness will decline over time and
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 12
    may differ from those illustrated. Projector Power Cord VGA Cable Multi-language User Manual CD Quick Start Guide Remote Control & Batteries Optional accessories 1. Replacement lamp (RLC-092 for PJD5151/PJD5153/PJD5155/PJD5250/PJD5253/ PJD5255. RLC-093 for PJD5555w) 2. Soft carry case 3. VGA
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 13
    RS-232 17 MINI USB COMPUTER IN 2 COMPUTER IN 1 RS-232 1. External control panel (See "Projector" on page 7 for details.) 2. Lamp cover 3. Vent (heated air exhaust) 4. Front IR remote sensor 5. Adjuster foot 6. Focus and Zoom rings 7. Projection lens 8. Audio signal output socket 9. Audio signal
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 14
    Lamp indicator light) Indicates the status of the lamp. Lights up 5. Power or flashes when the lamp has developed a Toggles the projector between standby problem adjustments. 8. / (Keystone keys) 14. Color Mode Manually corrects distorted images Selects an available picture setup mode.
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 15
    3D Exit 19 8 20 PgUp PgDn 9 21 10 Mouse Pattern Blank 22 11 23 24 12 25 13 Eco Mode Color Mode 26 14 27 To use the remote remote mouse control" on page 10 for details. Enacts the selected On-Screen Display (OSD) menu item. 1. Power Toggles the projector . Manually corrects
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 16
    timer settings Displays embedded test pattern. menu. 22. . Selects a lamp mode. 15. LED indicator 24. (Mute) Toggles the projector audio between on remote Menu 3D Exit control can control every projector. PgUp PgDn Mouse Pattern Blank If different codes are set on the projector and remote
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 17
    effective range The Infra-Red (IR) remote control is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 18
    , sunroom or in a closed car. • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 19
    , as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one projector suspended upside-down from the ceiling in front of the screen. Purchase the projector ceiling mount kit from your dealer to mount your projector
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 20
    projection screen usually consisting of a screen surface and a support structure. PJD5151/PJD5153/PJD5155/PJD5250/PJD5253/ PJD5255 • 4:3 offset [cm (inch)] [cm (inch)] 16:9 image on a 4:3 Screen (b) Projection distance [m (inch)] min. max. (c) Image height [cm (inch)] (d) Vertical offset [cm
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 21
    , you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 22
    vary with each projector model. For detailed connection methods, see pages 16-18. Notebook or desktop computer A/V device Monitor Speakers 76 5 8 4 7 (VGA) or (DVI) 3 17 1 2 or PJD5155/ PJD5255/ PJD5555w PJD5153/ PJD5253 PJD5151/ PJD5250 AUDIO S-VIDEO IN MINI USB OUT VIDEO COMPUTER
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 23
    or COMPUTER IN 2 signal input socket on the projector. 3. If you wish to use the remote mouse control function, take a USB cable and connect output socket on the projector to an external monitor with a VGA cable following the instructions below: 1. Connect the projector to a computer as described
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 24
    See "Connecting an HDMI device" on page 18 for how to connect the projector to an HDMI source device and other details. If no HDMI source is "Connecting an S-Video source device" on page 18 for how to connect the projector to an S-Video device. Least video quality Composite Video is an analog video
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 25
    signal cables have been connected correctly. VGA-Component adapter (ViewSonic P/N: CB-00008906) Connecting an S-Video source device Examine the other end of the S-Video cable to the S-VIDEO socket on the projector. The projector is only capable of playing mixed mono audio, even if a stereo audio
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 26
    cable management cover (optional accessory) This cable management cover helps you to conceal and organize the cables connected to the back of the projector. It is especially useful when the projector is ceiling-mounted or wallmounted. 1. Make sure that all the cables are properly connected to the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 27
    lamp life, once you turn the projector on, wait at least 5 minutes before turning it off. To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 35 for details. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 28
    Screen My Button Advanced English Front Table Disable ViewSonic Auto 2. Use / to highlight the SYSTEM SETTING: BASIC menu. Language Projector Position Menu Settings Blank Timer Splash Screen My Button Advanced English Front Table Disable ViewSonic Auto Analog RGB MENU Exit 4. Press Exit twice
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 29
    asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the Password Error password error message -digit password, or if you did not record the password in this user manual, and you absolutely do not remember it, you can use the password recall
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 30
    password recall procedure 1. Press and hold Auto Sync on the remote control for 3 seconds. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 31
    menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available input signals. PJD5155/PJD5255/PJD5555w D-Sub / Comp. 1 1. Press Source
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 32
    surface or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 26 for details. Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 33
    the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / to display it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. • Using the OSD menu
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 34
    unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the as it displays them without aspect alteration. 16:9 picture 4. 16:10 (PJD5555w): Scales an image so that it is displayed in the center of the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 35
    :1 aspect ratio without aspect alteration. 2.35:1 picture 8. Anamorphic (PJD5155/PJD5255/PJD5555w): Scales a 2.35:1 aspect image so that it fills the screen. 2.35:1 picture Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 36
    3. Standard mode: Is designed for presentations under daylight environment to match PC and notebook coloring. 4. ViewMatch mode: Switches between high brightness performance and accurate color performance. 5. Movie mode: Is appropriate for playing colorful movies, video clips from digital cameras or
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 37
    the projected picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select a level that suits your need. If you don't need
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 38
    you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you . Follow these steps to utilize this function: 1. Press on the remote control to access the Presentation Timer menu or go to the SYSTEM
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 39
    3. Highlight Timer Period and decide the time period by pressing / . The length of time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5minute increments. If the timer is already on, the timer will restart whenever the Timer Period is reset. 4. Press to highlight
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 40
    In order to draw the audience's full attention to the presenter, you can press Blank to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden. You can
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 41
    wear a pair of 3D glasses to view 3D images. If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the signal for 3D Sync information and once detected, it projects images in 3D format automatically. In other cases, you may need to manually select a 3D Sync format for
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 42
    to the SYSTEM SETTING: ADVANCED > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 43
    " will be heard. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. To turn off the Ring Tone" on page 35 for details. CAUTION • To protect the lamp, the projector will not respond to any commands during the cooling process. • To shorten
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 44
    no equipment connected to the projector or no signal detected, limited menu items are accessible. Main menu 1. DISPLAY 2. PICTURE Sub-menu Options Screen Color Off/Blackboard/Greenboard/ Whiteboard Aspect Ratio Auto/4:3/16:9/16:10 (PJD5555w)/Wide (PJD5555w)/ Panorama (PJD5151/PJD5153/ PJD5155
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 45
    min/25 min/30 min Splash Screen Black/Blue/ViewSonic/Off My Button Auto/Projection (Projector Position)/Menu Position/Color Temp./Brightness/Contrast/3D Settings/Screen Color/Splash Screen/Message/ Quick Auto Search/CEC/Lamp Mode/DCR/Closed Caption/Power Saving/Freeze/INFORMATION Pattern Off
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 46
    Settings Lamp Mode Reset Lamp Hours Lamp Hours Filter Mode Normal/Economic/ Dynamic/Sleep Mode On/Off Filter Settings Reset Filter Hours Filter Hours Remote Control Code 1/2/3/4/5/6/7/8 (All) Advanced Security Settings Change Password Power On Lock Panel Key Lock Off/On Reset Settings
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 47
    Description of each menu 1. DISPLAY menu Function Screen Color Aspect Ratio Keystone Position Phase Description See "Using Screen Color" on page 29 for details. This function is only available when a PC input signal is selected. See "Selecting the aspect ratio" on page 27 for details. See "
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 48
    settings to the factory preset values. Quick Auto Search See "Switching input signal" on page 24 for details. 3D Settings See "Using the 3D functions" on page 34 for details. Standby Settings See "Using the projector in standby mode" on page 35 for details. Computer Selecting Enable allows the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 49
    again, it will directly enter the standby mode. It takes some time to initiate this function. Make sure the projector has been turned on for more than 4 minutes. If the projector is resumed by using the Smart Restart feature, this function can be executed immediately. Quick Power Off When Enable
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 50
    be displayed during projector start-up. Sets a hotkey on remote control. Pattern The projector can display several test patterns. It helps PC input signal is selected. After enabling DCR, frequent lamp mode switching may shorten lamp life and noise level will vary during operation. Audio Settings
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 51
    is installed. For changing the lamp, please contact qualified service personnel. Lamp Hours See "Getting to know the lamp hour" on page 48 for details on how the total lamp hour is calculated. See "Using the dust filter (optional accessory)" on page 47 for details. See "Remote control code" on page
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 52
    menu. Resolution Shows the native resolution of the input signal. Current System Color System Status Shows input system format. Lamp Hours Displays the number of hours the lamp has been used. Filter Hours Displays the number of hours the filter has been used. Firmware Version Shows the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 53
    the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 53 or consult your dealer about the range. • Retract the adjuster foot. • Remove the battery from the remote control
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 54
    before installing or detaching the filter. • If your projector is ceiling-mounted or is not easily accessible, pay special attention to your personal safety when replacing the dust filter. Installing the dust filter 1. Be sure to turn off the projector and unplug it from power source. 2. As the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 55
    fit the filter back on and set Filter Mode to On. Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Open the OSD menu and go to the SYSTEM
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 56
    . If the lamp is not replaced beforehand, it must be replaced when you see this message. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > ____ Hours Lamp usage time exceeded OK Notice Out of Lamp Usage Time Replace lamp (refer to User Manual) Then
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 57
    Replacing the lamp Turn the power off and disconnect the projector from the power outlet. Please contact qualified service personnel for changing the lamp. Type number for the replacement lamp: • PJD5151/PJD5153/PJD5155/PJD5250/PJD5253/PJD5255: RLC-092 • PJD5555w: RLC-093 50
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 58
    cooling (3 sec) Off Downloading Lamp events Blue Flashing Off Off Off Blue Off Red First Lamp-Lit error cooling (60 sec) Red Lamp error in normal operation (30 short error (the remote diode has an short-circuit condition.) Red Blue Thermal sensor 2 short error (the remote diode has an
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 59
    and direction as well as the height of the projector if necessary. Remote control does not work Cause Remedy The battery is out of power. There is an obstacle between the remote control and the projector. You are too far away from the projector. Replace the battery with a new one. Remove the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 60
    be purchased in your region. General Product name DLP Projector Optical Resolution PJD5151/PJD5153/PJD5155: 800 x 600 SVGA PJD5250/PJD5253/PJD5255 1024 x 768 XGA Display system Lamp PJD5555w: 1280 x 800 WXGA 1-CHIP DMD 190 W lamp Electrical Power supply Power consumption AC100-240V, 50
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 61
    Audio signal output Speaker D-Sub 15-pin (female) x 1 (PJD5153/PJD5155/PJD5253/ PJD5255/PJD5555w only) Audio jack x 1 (PJD5153/PJD5155/PJD5253/PJD5255/ PJD5555w only) 2 watt x 1 (PJD5153/PJD5155/PJD5253/PJD5255/ PJD5555w only) Control terminal RS-232 serial control LAN USB serial control IR
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 62
    Dimensions 315.24 mm (W) x 97.7 mm (H) x 227.93 mm (D) (Excluding extrusions) 227.93 315.24 97.7 / Ceiling mount installation Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 63.62 60.87 27.13 13.00 1.45 198.10 Unit: mm 55
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 63
    Timing chart Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ UXGA WSXGA+ HD MAC 13" MAC 16" MAC 19" MAC 21" Analog RGB Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1152 x 864 4:3
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 64
    Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WSXGA+ HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) HDMI Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 65
    x 768 4:3 60* / 120** HD 1280 x 720 16:9 60* / 120** WXGA 1280 x 800 16:9 60* / 120** for Video Signal Signal Resolution (dots) Aspect Ratio Refresh Rate (Hz) SDTV (480i)*** 720 x 480 4:3 / 16:9 60 * 60Hz signals are supported for Side-By-Side, Top-Bottom, and Frame Sequential
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 66
    Signal HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) Signal NTSC PAL PAL60 SECAM Component video Resolution (dots) Aspect Ratio 1920 x 1080 16:9 1920 x 1080 16:9 1280 x 720 16:9 720 x 480 4:3 / 16:9 720 x 576 4:3 / 16:9 720 x 480 4:3 / 16:9 720
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 67
    optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no without obligation to notify any person of such revision or changes. *DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments.
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 68
    Magnify Presentation Timer Exit D. ECO (Eco mode) Menu Mouse Mouse Left Mouse Right Source Pattern My button HDMI Volume+ VolumeKey pad lock VGA1 VGA2 Help 3D Format NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 69
    Address code Code 1 83F4 Code 2 93F4 Code 3 A3F4 Code 4 B3F4 Code 5 C3F4 Code 6 D3F4 Code 7 E3F4 Code 8 F3F4 RS232 command table Pin 1 3 5 7 9 Description NC TX GND RTSZ NC Baud Rate Data Length Parity Check Stop Bit Flow Control
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 70
    Black Splash Screen Blue Splash Screen Write Splash Screen ViewSonic Splash Screen Screen Capture Splash Screen Off Read Splash Screen Altitude Mode On High Altitude Mode status Normal Lamp Mode Write Economic Dynamic Sleep Mode Read Lamp Mode status cmd 0x06 0x14 0x00 0x04 0x00 0x34
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 71
    Off Message On Message status Front Table Rear Table Rear Ceiling Front Ceiling projector position status OFF Auto Frame Sequential Frame Packing Top-Bottom Side-by-Side 3D Sync Status Off On 3D Sync Invert Status Contrast decrease Contrast increase Contrast ratio Brightness decrease Brightness
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 72
    Aspect ratio Auto Adjust Horizontal position Vertical position Write Aspect ratio Auto Aspect ratio 4:3 Aspect ratio 16:9 Aspect ratio 16:10 Aspect ratio Anamorphic Aspect ratio Wide Aspect ratio 2.35:1 Aspect ratio Panorama Read Aspect ratio Execute Write Horizontal position shift right
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 73
    Color temperature Write Read Blank Write Read KeystoneVertical Write Read KeystoneHorizontal Write Read Color mode Write Read color temperature Warm color temperature Normal color temperature Neutral color temperature Cool color temperature status Blank on Blank off Blank status Decrease
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 74
    Primary Color Hue Saturation Gain Freeze Write Read Write Read Write Read Write Read Write Read Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color status Hue decrease Hue increase Hue Saturation decrease Saturation increase Saturation Gain
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 75
    Source input Quick Auto Search Mute Volume Write Read Write Read Write Read Write Read Input source VGA Input source VGA2 Input source HDMI Input source Composite Input source SVIDEO Source Quick Auto Search on Quick Auto Search off Quick Auto Search status Mute on Mute off Mute status Increase
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 76
    Language Write Read Lamp Time Write Read 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 0x00 0x34 0x15 0x00 0x12 0x73 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x13 0x74 Language Reset Lamp usage hour Lamp usage hour 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x14 0x75 0x07 0x14 0x00 0x05 0x00 0x34
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 77
    HDMI Format HDMI Range CEC Error status Brilliant Color Write Read Write Read Write Read Read Write Read RGB YUV Auto HDMI Format status Enhanced Normal Auto HDMI Range status Off On CEC status Read error status Brilliant Color 0 Brilliant Color 1 Brilliant Color 2 Brilliant Color 3 Brilliant
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 78
    Control code Screen Color Over Scan Write Read Write Read Write Read code 1 code 2 code 3 code 4 code 5 code 6 code 7 code 8 Remote Control code status Screen color Off Blackboard Greenboard Whiteboard Screen Color status Overscan Off Overscan 1 Overscan 2 Overscan 3 Overscan 4 Overscan 5 Overscan
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 79
    Remote Key Write Menu Exit Up Down Left Right Source Enter Auto My Button 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 0x02 0x14
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 80
    .com/uk/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 266 0101 [email protected] Korea ap.viewsonic.com/kr/ T= 080 333 2131 [email protected] Latin America (Argentina) www.viewsonic.com/la
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 81
    lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or local ViewSonic office for the warranty information. Limited One (1) year Heavy Usage Warranty: Under heavy usage settings, where a projector to follow instructions supplied with the
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 82
    contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product's serial number. 2. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 83
    period of time. 4. Removal, installation, insurance, and set-up service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 84
    39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688-6688 (English
  • ViewSonic PJD5153 | PJD5153 User Guide English - Page 85
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
PJD5151/PJD5153/PJD5155/
PJD5250/PJD5253/PJD5255/
PJD5555w_Tiger
DLP Projector
User Guide
Model No.
VS15871/VS15872/VS15873/
VS15874/VS14115/VS15875/
VS15876
IMPORTANT:
Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”