Home » ViewSonic Manuals » Projectors » ViewSonic PJD6381 » Manual Viewer

ViewSonic PJD6381 PJD6381 User Guide (English)

ViewSonic PJD6381 - 2500 Lumens XGA DLP Ultra Short-Throw Projector Manual

UPC - 766907342611

View all ViewSonic PJD6381 manuals

Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJD6381 manual content summary:

ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 1
ViewSonic® PJD6381 DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 2
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 3
accordance with the manufacturer's instructions. 8. Do not consult an electrician for replacement of the obsolete outlet accessible. 11. Only use attachments/accessories specified by the manufacturer. 12. 14. Refer all servicing to qualified service personnel. Servicing is required when the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 4
of the RoHS Directives as noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components, fluorescent
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 5
product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. ViewSonic. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJD6381 ViewSonic DLP Projector VS12461 PJD6381_UG_ENG Rev. 1B 01-01-10 The lamp
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 6
Cord must meet the requirement of countries where you use this projector. Please confirm your AC plug type with the graphics below Power Cord does not match your AC outlet, please contact your sales dealer. This projector is equipped with a grounding type AC line plug. Please ensure that your outlet
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 7
Operation 18 Network Control 25 Maintenance 40 Cleaning the Lens ...40 Cleaning the Projector Housing 40 Replacing the Lamp 41 Specifications 43 Appendix ...44 LED Indicator Messages 44 Compatibility Modes 45 Troubleshooting ...47 RS-232 Command and Configuration 48 IR Control Code ...50 EN
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 8
integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: „ Single chip 1.397cm / 0.55" Texas Instruments DLP® technology „ XGA (1024 x 768 pixels) „ Auto image re-sizing (Auto
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 9
, make sure you have all these components: Projector with Lens Cap AC Power Cord Remote Control (IR) & batteries Projector Carrying Case VGA Cable (D-SUB to D- ViewSonic CD SUB) Wizard Optional accessories Quick Start Guide RS232 cable P/N: J2552-0208-00 RGB to component adapter P/N: J2552
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 10
Projector Overview Front View 10 9 87 1 2 3 45 6 1 Lens cap 2 Elevator button 3 Lens cap strap 4 Projection lens 5 Front IR remote control sensor 6 Ventilation holes (intake) 7 Speaker 8 Focus ring 9 Control panel 10 Lamp cover EN-7
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 11
23 Kensington lock 4 Rear IR remote control sensor 5 Ventilation holes (exhaust) 6 Security bar Bottom View 143.0mm 1 2 1 Ceiling mount (M4*6) 2 Tilt-adjustment feet 70.0mm 90.0mm „ This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 12
LED Indicator Messages". 3 LAMP (Lamp LED indicator) Refer to "LED Indicator Messages". Button Function 4 / Keystone Manually correct distorted images resulting to sub-menu and confirm the menu selection. 7 SOURCE Manually select an input source. 8 MENU/EXIT Display or exit the on-screen display
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 13
LAN For network control. 2 USB This connector is for firmware update and mouse function support. 3 VIDEO Connect composite video output from video equipment to or component) to this jack. 8 RS-232 When operating the projector via a computer, connect this to the controlling computer's RS-232C port
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 14
Left Click, and Exit/Mouse Right Click buttons). 9 Laser Aim the remote at the viewing 16 Magnify Zoom in and out the images. screen, press and hold projector to the input signal from a computer. This function is available for computer mode only. 19 Light Enable backlit functions of the remote
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 15
inside the compartment. 3. Close the battery cover into position. Caution „ Risk of explosion if battery is replaced by an incorrect type. „ Dispose of used batteries according to the instructions. „ Make sure the plus and minus terminals are correctly aligned when loading a battery. „ Keep the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 16
projector from the rear 10 15 5m 7m 5m 5m 10 15 5m 7m „ Do not point the laser directly to the people's eyes (especially small children). There is a danger of injury to the eyes. „ The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 17
Video Cable 7 S-Video Cable 8 Internet Cable Laptop type Desktop type 2 1 232 4 8 5 4 76 5 4 WPG-350 „ When connecting cable, power cords of both projector and external equipment should be disconnected from AC outlet. „ The figure above is a sample connection. This does not mean that all
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 18
„ If you are connecting multiple sources to the projector simultaneously, press the SOURCE button on the control panel or the Source button on the remote control. Warning „ Remove the lens cap first before powering on. „ Never look into the lens when the lamp is on. This can damage your eyes. „ This
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 19
height. To raise or lower the image: 1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment. 2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height. „ To
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 20
. „ Keep a space of 30 cm or more between the sides of the projector. „ Do not use the projector in a smoky environment. Smoke residue may build- up on critical parts and damage the projector or its performance. „ Consult with your dealer for special installation such as suspending from a ceiling
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 21
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. EN-18
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 22
*1 Adjustable range and default setting vary depending on signal type. *2 This function is only available when the projector is installed an optional filter cover. EN-19
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 23
projector will User Color User Color provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference. Keystone Manually correct distorted images resulting from an angled projection. Aspect Ratio
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 24
value, dark scenery will look brighter. 3D Sync „ On: 120Hz detection „ Off: Disable 120Hz 3D Sync Invert „ On: Invert left and right frame contents. „ Off: Default frame contents. Computer Image (Computer Mode) Frequency Adjust the timing of the projector relative to the computer. Tracking Adjust
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 25
to 0 hours. Power Saving If no operation is performed for a specific period of time, projector will automatically turn off. Auto Source Automatically scan through all the input source. ECO Mode Use this function to dim the projector lamp light output which will lower power consumption and increase
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 26
Ratio) Enable DCR will further enhance contrast ratio by darkening the black scenes. Disable DCR will resume to normal contrast performance. DCR will impact lamp that means user will set IP address by manually. „ Auto IP function will be assigned an IP address if the projector could not obtain EN-23
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 27
to identify networked computers. This function can only be used when DHCP is set to No. „ The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network. „ The IP Address "0.0.0.0" is prohibited. Subnet Mask
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 28
Network Control This feature provides the ability to remotely control and manage the projector through the network. Preparation: 1. Connect one end of the internet cable to the Network Control connector on the projector. 2. Connect the other end of the internet cable to an available RJ-45 connector
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 29
specify following URL, then click "Go" button. „ URL: http://(Projector IP address)/ „ For example, if projector IP address is 169.254.1.1, specify URL: http:// 169.254.1.1/ 3. If connection succeeds, the login screen is displayed. Enter your User name and Password and click "OK". Below are the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 30
B. Manual IP address setting (DHCP: No): 1. Set IP Address and Subnet Mask under Network Config. „ IP Address: Numerical address to identify networked computers. „ Subnet Mask: A numeric
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 31
„ Click "Use the following IP address" „ The network address portion included in the IP address set into your PC should be common with projector's one. „ In this case, projector has "169.254.1.1" IP address, specify "169.254.1.xxx" for PC's IP address. Select from 1 to 254 for "xxx" except 2 for PC
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 32
specify following URL, then click "Go" button. „ URL: http://(Projector IP address)/ „ For example, if projector IP address is 169.254.1.1, specify URL: http:// 169.254.1.1/. 6. If connection succeeds, the login screen is displayed. Enter your User name and Password and click "OK". Below are the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 33
Control the projector via a web browser Login If the administrator and user passwords are disabled, it will directly go into the Status page. EN-30
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 34
to login. Authority on the network control of Administrator & User: Item Description Administrator Status Show current projector status and network v configuration settings. Control Control the projector via network. v Network Setting Network configuration & Password setup. v Alert
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 35
Status All screen images in this manual are shown when you login with the Administrator ID. The image will differ if you login with User ID. Item IP Address MAC Address Projector Name System Status Input Status Lamp Hours Filter Hours System Temperature Projector Status F/W Version Date(mm/dd/yy)
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 36
Brightness Contrast Color Temperature Keystone Picture Mode Aspect Ratio Freeze Video Image Color Description Power On or Power Off the projector via network. Select input source. Show date set on current projector. Show time set on current projector*. Adjusts the volume setting. (0 - 20) Enable or
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 37
Tint Sharpness Computer Image Frequency Tracking H Position V Position Setting Menu Position Projection Auto Source ECO mode High Altitude OSD Timeout Language Factory Default Option ViewMatch White Intensity Gamma Signal Type Filter Mode Power Saving Start Up Screen Closed Caption Blank Screen
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 38
Network DHCP Assign an IP address to the projector from the DHCP server automatically or manually. IP Address Setup IP address when DHCP . User Enable or disable user password function. New Password Setup user password. (Max length: 4 characters) Confirm Password Re-enter user password
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 39
the company. For example: mail.viewsonic.com (Max length: 30 characters) User Name Enter user name of the sender's e- projector internal is over heated. Lamp Fail The lamp does not light up. Lamp Time Alert Lamp is approaching the end of its useful life in full power operation. Replacement
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 40
Schedule: defines the date of each week will execute the command Click "Add" button to create new schedule. To delete schedule, click "Cancel". Specific Day: defines the month and day that will execute the command. Click "Submit" button to create new schedule. To delete schedule, click "Cancel
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 41
Tips for solving web page problems: If your web page is not running smoothly, please follow below steps to set the browser. 1. Go to Tools > General and click "Settings". EN-38
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 42
2. Click "Every visit to the page" and "OK". 3. Click "OK" to exit "Internet Properties". EN-39
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 43
as dust, dirt or spots will project on the screen and diminish image quality. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning Never open any of the covers on the
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 44
message is displayed. Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. „ The lamp is extremely hot right after turning off the projector. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least 45 minutes for
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 45
mount, remove it 3. Unplug the power cord. 4. Loosen the screw in the side of the lamp cover and remove the cover. 5. Remove the screws from the lamp module, raise the handle, and lift out the module. 6. Insert the new lamp module into the projector and tighten the screws. 7. Replace the lamp
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 46
Specifications Display system Single 1.397cm / 0.55" DLP panel Resolution XGA (1024 × 768) F/No. 2.83 Focal length 7.73mm Screen size 101.6cm ~ 762cm / 40" - 300" Lamp 230W Input terminal D-Sub 15-pin x 2, S-VIDEO x 1, VIDEO x 1, Audio signal input (3.5 mm stereo mini jack) x 2
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 47
Red Solid (Full brightness) Flash Off Off Solid Solid Meaning The projector is in standby mode. Powering up Normal operation Power-down The projector system has some problems with its fans, so the projector cannot start up. The lamp is in good condition and is projecting at maximum brightness. The
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 48
Compatibility Modes Computer: Compatibility VGA Resolution 640 x 480 SVGA 640 x 480 @ 120Hz 720 x 400 800 x 600 XGA 800 x 600 @ 120Hz 1024 x 768 SXGA 1024 x 768 @ 120Hz 1152 x 864 1280 x 960 1280 x 1024 1280 x 960 1280 x 1024 14460 x 1050 1600 x 1200 H-Sync [KHz]
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 49
Video: Signal 1080i 1080i 1080p 1080p 720p 720p 576p 576i 480p 480i Horizontal Frequency (kHz) 33.8 28.1 67.5 56.3 45.0 37.5 31.3 15.8 31.5 15.8 Vertical Frequency (Hz) 60.0 50.0 60.0 50.0 60.0 50.0 50.0 50.0 60.0 60.0 EN-46
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 50
Troubleshooting Refer to the symptoms and measures listed below before sending the projector for repairs. If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: „ Be sure that the power cord is
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 51
Aspect Ratio BE, EF, 03, 06, 00, Factory Reset BE, EF, 03, 06, 00, Lamp Hour BE, EF, 03, 06, 00, Firmware 89, DB, 58, DA, 57, D0, 86, D1, DF, DF, 3D, DE, 10, DB, 23, DB, F2, DA, 0D, DA, 6B, Lamp Hour 70, 00, 00, 00, 00, 00 Version 71, 00, 00, 00, 00, 00 03:Projector ON (Normal Mode) EN-48
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 52
D-Sub 9 pin 1 1 CD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Wire List C1 COLOR 1 Black 2 Brown 3 Red 4 Orange 5 Yellow 6 Green 7 Blue 8 Purple 9 White SHELL DW C2 1 2 3 4 5 6 7 8 9 SHELL EN-49
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 53
IR Control Code Key Power Source Up Down Left Right MENU Auto Mouse ViewMatch Freeze Enter / Mouse Left Exit / Mouse Right KeyS+ KeySDigital Zoom+ Digital ZoomVolume+ VolumeMute Blank Format NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC NEC Byte1 83 83 83 83 83
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 54
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=Telephone F=Fax Australia/New Zealand www.viewsonic.com.au Canada Europe/Middle East/Baltic countries/North Africa
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 55
ViewSonic office for the warranty information. Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp only. All accessory lamps to follow instructions supplied with the product. b. Operation outside of product specifications. c. Operation
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 56
meeting ViewSonic's specifications. i. Normal wear and tear. j. Any other cause which does not relate to a product defect. 3. Removal, installation, and set-up service charges. How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 57
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories. How long the warranty is effective: 3 years for all parts excluding the lamp, 3 years
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 58
ón (Grupo Sesicomp) Global Product Services Progreso #6-A, Colo Centro Mar Caribe E-Mail. [email protected] Tijuana: FOR USA SUPPORT: STD ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea viewsonic.com 4.3: ViewSonic Mexico Limited Warranty PRJ_LW03 Rev. 1A 06-25-07
ViewSonic PJD6381 | PJD6381 User Guide (English) - Page 59

Section	Page
VPD-X5501-EN.pdf	6
Introduction	8
Projector Features	8
Package Contents	9
Projector with Lens Cap	9
AC Power Cord	9
Projector Overview	10
Using the Product	12
Control Panel	12
Connection Ports	13
Remote Control	14
Installing the Batteries	15
1. Open the battery cover in the direction shown.	15
2. Install batteries as indicated by the diagram inside the compartment.	15
3. Close the battery cover into position.	15
Remote Control Operation	16
Installation	17
Connecting the Projector	17
Powering On/Off the Projector	18
Powering On the Projector:	18
1. Remove the projector lens cap.	18
2. Complete the AC power cord and peripheral signal cable(s) connections.	18
3. Press button to turn on the projector. The projector takes a minute or so to warm up.	18
4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.	18
Powering Off the Projector:	18
1. Press button to turn off the projector lamp. You will see a message \	18
2. Press button again to confirm.	18
3. Disconnect the AC power cord from the electrical outlet and the projector.	18
4. Do not turn on the projector right after power off.	18
Adjusting the Projector	19
Adjusting the Projector Height	19
1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment.	19
2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height.	19
Adjusting the Projector Focus	19
1. Focus the image by rotating the focus ring. A still image is recommended for focusing.	19
Adjusting Projection Image Size	20
Menu Operation	21
1. Press the MENU button to open the OSD menu.	23
2. When OSD is displayed, use p / q to select any feature in the main menu.	23
3. After selecting the desired main menu item, press u to enter sub-menu for feature setting.	23
4. Use p / q to select the desired item and adjust the settings with t / u.	23
5. Press the MENU button, the screen will return to the main menu.	23
6. To exit OSD, Press the MENU button again. The OSD menu will close and the projector will automatically save the new settings.	23
Network Control	28
1. Connect one end of the internet cable to the Network Control connector on the projector.	28
2. Connect the other end of the internet cable to an available RJ-45 connector on your computer.	28
3. Turn on your projector and computer.	28
1. Enable DHCP from the projector OSD, under Network Config.	28
2. Start browser in PC and specify following URL, then click “Go” button.	29
3. If connection succeeds, the login screen is displayed. Enter your User name and Password and click “OK”. Below are the factory default settings for administrator, user and passwords.	29
1. Set IP Address and Subnet Mask under Network Config.	30
2. From your computer, go to Start > Settings > Network and Dial-up Connections > Local Area Connection and right click to select Properties..	30
3. Select \	31
4. Set your PC’s IP address, and click OK.	31
5. Start browser in PC and specify following URL, then click “Go” button.	32
6. If connection succeeds, the login screen is displayed. Enter your User name and Password and click “OK”. Below are the factory default settings for administrator, user and passwords.	32
1. Go to Tools > General and click \	41
2. Click \	42
3. Click \	42
Maintenance	43
Cleaning the Lens	43
Cleaning the Projector Housing	43
Cleaning the Filter Cover	43
1. Switch the projector off and unplug the AC power cord from the wall socket.	43
2. Remove the filter cover as the illustration shown.	43
3. Clean the filter cover.	43
4. Replace the filter cover.	43
5. Attach the filter cover.	43
6. Plug the power back into the projector.	43
Replacing the Lamp	44
1. Turn off the projector.	45
2. If the projector is installed in a ceiling mount, remove it	45
3. Unplug the power cord.	45
4. Loosen the screw in the side of the lamp cover and remove the cover.	45
5. Remove the screws from the lamp module, raise the handle, and lift out the module.	45
6. Insert the new lamp module into the projector and tighten the screws.	45
7. Replace the lamp cover and tighten the screw.	45
8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.	45
9. Reset the lamp hour. Refer to the “Setting” menu.	45
Specifications	46
Appendix	47
LED Indicator Messages	47
Compatibility Modes	48
Computer:	48
Video:	49
Troubleshooting	50
Start-up problems	50
Image problems	50
RS-232 Command and Configuration	51