ViewSonic VT2230 VT2230 User Guide NT (Taiwan) Region (English) - Page 15

Notes: Refer to these notes before connecting any audio / video equipment to this Display: • Refer to the manuals of your Display, stereo, or other equipment. • Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you have completed connecting everything. Never make or change connections when equipment still connected to a power outlet. • Connect DVD player directly to the Display. For example, do not connect DVD player to VCR and then connect the VCR to your Display. This type of connection could distort both the picture and the sound. Your VCR might have a copy protection system which could distorted the DVD image. • Set the stereo system to the correct channel or source if your video equipment is also connected to a stereo system. • You only need one audio connection and one video connection between your Display and other audio/ YLGHRHTXLSPHQWVXFKDV'9'SOD\HU9&5&DPFRUGHU 7KLVPHDQVLWLVSRVVLEOH\RXZLOOQRWXVH all the jacks on the Display. • If you plan to watch Display via your DVD player or VCR, connect a coaxial cable to the DVD player's or VCR's TUNER IN jack then connect to the antenna jack on your LCD Display. This allows you to watch channels on the Display normally when the DVD player or VCR is off. • The function of your existing audio/video equipment, governing the connection mode between your Display and existing audio/video equipment. Progressive Scan Component Video and Component Video have the highest picture quality but it can only be used if the connected video equipment supports Progressive Scan Component Video or component video. S-Video provides a high signal TXDOLW\ &RPSRVLWH 9LGHR D \HOORZ 9LGHR MDFN  SURYLGHV D JRRG YLGHR RXWSXW 3OHDVH IROORZ WKH correct step to connect existing audio/video equipment. ViewSonic 13 VT2230-NT