Viper 3002 Owner Manual - Page 9
system maintenance, your warranty - remote
View all Viper 3002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
➜ system maintenance This system needs no specific maintenance beyond 2-way remote control battery replacement. The 2-way remote is powered by a 1.5V AAA battery. The 1-way remote is powered by a pair of 3V CR2016 batteries. Low Battery Notification If the battery is low (and this feature is programmed On) the 2way remote will emit 2 long beeps 5-seconds after a transmission is completed. The 2 long beeps will repeat every 25 seconds up to 3 times (or until a 2-way remote button is pressed). Battery Replacement Gently pull the end of the battery door away from the top of the remote control then slide the door up to expose the battery and remove the expired battery. Place the new battery into the remote control observing the correct polarity. When power is returned the remote control will light all icons and generate melodies (representing all beeper tones). ➜ your warranty Your warranty registration must be returned and the bar code serial number must not be removed. If the warranty registration is not returned, you do not have a warranty. It is also necessary to keep your proof of purchase, which reflects that the product was installed by an authorized dealer. Make sure that you receive the warranty registration from your dealer. 10 © 2006 directed electronics