Viper 3203 Owner Manual - Page 14
Advanced Commands: Level 2
View all Viper 3203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Advanced Commands: (Level 2) Press and release the button 2 times. The and aux LED's illuminate indicating Level 2 Note: The transmit LED on the 1-way remote will flash in groups of 2 to indicate level 2. Sensor Bypass Press and release Performing the sensor bypass command will incrementally bypass sensor operations and be confirmed as follows: s Warn-away Bypass: The parking lights flash 2 times. The arm LED, 1 beep and 1 fault tone play to confirm. Sensors will be activated for full trigger levels of impact only. s Warn-away & Full Trigger Bypass: The parking lights flash 3 times. The arm LED, 1 beep and 2 fault tones play to confirm. Sensors will not be activated for any level of impact. s Sensor Bypass Off: The parking lights flash 1 time. The arm LED and 1 beep play to confirm. Sensors are fully operational. Note Sensor bypass can only be performed when the system is armed. The LED and a long fault tone plays as an alert when performing sensor bypass when the system is disarmed. Perform arm command any time to turn sensor bypass off. Remote Valet Press and release Enters (or if on, exits) valet mode. The control center LED turns on and © 2009 Directed Electronics. All rights reserved. 11