Viper 3203 Owner Manual - Page 19

Prepare the remote control Select the desired car 1 (default) or car 2 operation before proceeding. 1. Press and hold the button of the remote control for 8 seconds until the transmit LED turns on, and then release it (If programmed to operate two systems, ignore the Transmit LED flashes at 3 seconds). 2. Press and hold the button until the transmit LED flashes off and on three times. 3. Press and hold the button until the siren emits one long chirp to confirm Pairing. Note: 2-way remote controls MUST also emit a sequence of chimes to confirm pairing is successful. If not heard, make sure the system is still prepared and repeat step 3 until successful. Remote Features Press the button to access the remote operation features, 2 transmit LED flashes and 2 beeps indicate the remote features menu is accessed. Press the buttons indicated in the tables below to set the feature option. Responder LE The ghost LED's next to the button indicate the feature settings. Feature Button LED on Press LED off LED Flash LED Double Flash Keypad Lock Auto Off Remote Beeps Car 2 Beeps On Car 2 On Beeps Off Car 2 Off Triggers only 16 © 2009 Directed Electronics. All rights reserved.