Viper 4204 Owner Manual - Page 28
Remote and System Operations - install
View all Viper 4204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Remote and System Operations Passive Locking* Park and exit the vehicle, after the doors are closed the Passive locking countdown begins. The led flashes quickly and upon reaching 20 seconds then the horn honks once. At 30 seconds the system locks itself. Anytime before the system locks you can re-enter the vehicle or open the trunk to load or unload items and, after closing passive locking resumes. To stay secure in case of accidental unlocking of the system, if a door is not opened within 30 seconds the system relocks the doors. Auto Re-locking* Auto re-locking ensures the vehicle stays protected if it is not entered after unlocking by remote control. After unlocking by remote, the doors automatically lock, if programmed on, in 30 seconds. Open any point of entry to stop the re-lock until the next unlock by remote. Onetime Bypass* Turn the ignition On for one to three seconds and then Off. The horn honks once to confirm one-time bypass is enabled. One-time bypass can be used to temporarily bypass the Passive locking operation for one cycle. It also bypasses the comfort closure and auxiliary channel outputs if programmed to activate when locking. After the next unlock, all operations return to normal. * The optional horn honk feature must be installed. © 2011 Directed Electronics. All rights reserved. 25