Vizio E420VL E470VL User Manual - Page 47

VIZIO E420VL / E470VL / E550VL User Manual Programming your Cable or Satellite Set-Top Box 1. Turn on the Cable or Satellite Set-Top Box. 2. Press and release the CABLE button on your VIZIO universal remote control. 3. Press and hold the SET button until the LED flashes twice. My Codes 4. Find the programming code for your Cable or Satellite Set-Top Box and enter it using the number buttons. If the code is accepted, the LED flashes twice after the last digit is entered. If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed. 5. Point the remote control at the Cable or Satellite Set-Top Box and press POWER. The Cable or Satellite Set-Top Box will turn off. If the Cable or Satellite Set-Top Box does not turn off, repeat Steps 2 through 4 with the next code listed for the component and manufacturer. DVD Player Home Theater Cable Box Satellite Box VCR Other Other Other Searching for Device Codes If you cannot find the manufacturer in the list or the program code does not work, you can use the remote control to search for the correct device code. 1. Turn on the device. 2. Press the matching device button on your VIZIO universal remote control. 3. Press and hold SET until the LED flashes twice. 4. Press 9 9 1. The LED flashes twice. 5. Point the remote control at the device and then press and hold POWER until the device turns off. Reset Remote to Factory Settings 1. Press and hold SET until the LED flashes twice. 2. Press 9 1 9 1 9. The LED flashes twice. Version 2/12/2010 47 www.VIZIO.com