Vizio SB2020n-G6 User Manual - Page 10

3 Top Remove the battery cover by gently sliding it away from the remote. 4 Top Insert the included batteries and gently slide the battery cover back into place. When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell 'AAA' alkaline batteries. 5 Turn on your TV and sound bar. The sound bar will automatically begin searching for an active input.* The LED indicator on the front of the sound bar will begin cycling through inputs until an audio source is detected.** Tip: Pressing the INPUT button will stop the auto detect function. Power English - 10 You can press the INPUT button to switch between audio sources. For example, if you connected your TV to AUX , set the sound bar to AUX . *Occurs only during first-time set up. **Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds. Input