Vizio XWR100 XWR100 User Manual - Page 19

Transmit Power Receive Sensitivity Modulation Type Antenna Operating Channels Standard Voltage Range Power Operating Dimensions Net Weight Gross Weight Certifications 802.11b: 17dBm 802.11g: 54 Mbps - 13dBm 802.11a: 54 Mbps - 13dBm 802.11gn HT20: MCS15/7- 11dBm 802.11gn HT40: MCS15/7- 8.5dBm 802.11an HT20: MCS15/7 - 11dBm 802.11an HT40: MCS15/7 - 11dBm 802.11b: 11Mbps:- 86dBm 802.11g: 54 Mbps:- 75dBm 802.11a: 54 Mbps:- 74dBm 802.11b: CCK,DQPSK,DBPSK 802.11g: 64 QAM, 16 QAM,QPSK, BPSK 802.11a: 64 QAM, 16 QAM,QPSK, BPSK HT20,HT40: 64 QAM, 16 QAM,QPSK, BPSK 4 internal antenna 2.4GHz: 11b/g/n for North America 5GHZ: 11a/n for North America IEEE 802.11 a/b/g/n, 802.3u, USB Power 110~240Vac at 50/60 Hz 12 Vdc 1.5 A Environmental Conditions Temperature: 41°F ~ 105.8°F (0°C~40°C) Relative Humidity: 10~80% noncondensing 7.98 × 5.87 × 1.3 inches (202.79 × 149 × 32.97 mm) .66 lbs. (0.3 kg) 1.1 lbs. (0.5 kg) FCC, CE, UL (Power Adapter) *Product specifications may change without notice or obligation. Legal notices FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment or devices Connect the equipment to an outlet other than the receiver's Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the built-in collocated transmitters. The availability of some specific channels