Vtech ATT 1465 User Manual - Page 39
after correct - at t phone parts
UPC - 650530031137
View all Vtech ATT 1465 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
ATT-1465CIB-d04.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 37 Appendix In case of difficulty If you lose a call after changing channels • You were probably almost out of range. Move closer to the base before changing channels. Before placing another call, set the handset in the base for at least 15 seconds. Incomplete messages • If a caller leaves a very long message, part of it may be lost when the system disconnects the call after 4 minutes. • If the caller pauses for more than 7 seconds, the system stops recording and disconnects the call. • If the system's memory becomes full during a message, the system stops recording and disconnects the call. ^ Difficulty hear- ing messages • Press to increase speaker volume. System does not answer after correct number of rings • Make sure that the answering system is on. • If Toll Saver is activated, the number of rings changes to two when you have new messages waiting (see page 29). • In some cases, the system may be affected by the ringing system used by the local telephone company. • If the memory is full or the system is off, the system will answer after 10 rings. "CL" flashes in • You need to reset the answering system clock (see page 26). message window System does not respond to remote commands • Make sure to enter your Remote Access Code correctly (see page 33). • Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system. • The answering system may not detect the Remote Access Code while your announcement is playing. Try waiting until the announcement is over before entering the code. • There may be noise or interference on the phone line you are using. Press dial-pad buttons firmly. Announcement message is not clear • When you record your announcement, make sure you speak in a normal tone of voice, about 9 inches from the base. • Make sure there is no "background" noise (TV, music, etc.) while you are recording. 37