Vtech LS6325-4 User Manual - Page 57

Appendix Expand your telephone system The handsets provided with your telephone system are already registered. Each handset is assigned a number that displays on the handset. Additional handsets registered to the telephone system are assigned in sequential order. For instance, if the telephone system already has HANDSET 1 and HANDSET 2, the new registered handset is assigned HANDSET 3. This telephone system accommodates up to five handsets. Add and register a handset (optional) You can add new handsets (LS6305, purchased separately) to your telephone system. Each handset must be registered with the telephone base before use. When first purchased, each handset shows 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. You may need to charge the handset before registering it to the telephone base. For more details on battery charging, see page 4. To register a handset: 1. Place the unregistered handset in the telephone base or charger. If 1.Press FIND HS on base 4sec and 2.Then press # on handset do not appear alternately on the handset screen after a few seconds, remove the handset and place it in the telephone base or charger again. 2. On the telephone base, press and hold /FIND HANDSET for about four seconds until the red IN USE light on the telephone base turns on. 3. Remove the handset from the telephone base or charger and then press # (pound key). It displays Registering...Please wait. It takes about 10 seconds to complete the registration. The handset shows Handset X Registered and you hear a beep when the registration completes. • If the registration fails, the handset displays Registration failed for a few seconds, then 1.Press FIND HS on base 4sec and 2.Then press # on handset alternately. To reset the handset, remove it from the telephone base and place it back in. Try the registration process again. • You cannot register a handset if any other system handset is in use. 53