Vtech TD45270194 User Manual - Page 2

Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Charger and charger adapter (1 for CS6114-2 and CS6114-21) Telephone line cord Battery compartment cover (1 for CS6114 and CS6114-11, 2 for CS6114-2 and C S 6114 - 21) Battery (1 for CS6114 and C S 6114 -11, 2 for CS6114-2 and C S 6114 - 21) User's manual CANCEL Telephone base power adapter Handset Telephone base (1 for CS6114 and C S 6114 -11, 2 for CS6114-2 and C S 6114 - 21) User's manual Telephone base and charger installation Install the telephone base and charger as shown below. Telephone wall jack DSL filter (not included) is required if you have DSL high-speed Internet service Electrical outlet (not controlled by a wall switch) Telephone base power adapter Charger adapter Telephone line cord Telephone base Charger • Use only the power adapter(s) and battery(ies) supplied with this product. To order a replacement, visit our website at www.vtechcanada.com or call 1 (800) 267-7377. • The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. Wall mounting (optional) Your telephone comes ready for tabletop use. To mount your telephone on the wall: . Position the top hole at the back of the telephone base against the top mounting stud [A]. 2. Slide the telephone base down on the mounting studs [A] and [B] until it locks into place. [A] Mounting studs [B]  Telephone base