Vtech TL7600 User Manual
Vtech TL7600 Manual
 |
View all Vtech TL7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Vtech TL7600 manual content summary:
- Vtech TL7600 | User Manual - Page 1
User's manual TL7600 DECT 6.0 expansion headset - Vtech TL7600 | User Manual - Page 2
user's manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: TL7600 Type: DECT 6.0 expansion headset - Vtech TL7600 | User Manual - Page 3
Parts checklist Check to make sure the headset package includes the following items: User's manual TL7600 DECT 6.0 expansion headset User's manual Cordless headset Over-the-ear hook Headset charger Battery compartment cover Battery for headset Charger power adapter Behind-the-neckband Over- - Vtech TL7600 | User Manual - Page 4
Charger installation 2 Battery installation 3 Battery charging 4 Registering the headset............5 To register a headset to the DECT headset base......6 To register the headset to an AT&T DECT cordless telephone base 7 Quick reference guide 8 Headset attachments Over-the-ear hook 9 Over-the - Vtech TL7600 | User Manual - Page 5
Table of contents De-registration Replacing a headset 25 To de-register all headsets from the headset base....25 To de-register all headset(s) from an AT&T cordless telephone base 26 - Vtech TL7600 | User Manual - Page 6
Getting started Installation preparation You must install and charge the battery before using the headset. STOP! See pages 3-4 for easy instructions. If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone lines, you must install a DSL filter - Vtech TL7600 | User Manual - Page 7
a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapter is intended to be correctly oriented in - Vtech TL7600 | User Manual - Page 8
according to the color-coded label and place the wires neatly inside the compartment. 4. Insert the tab on the bottom of the battery cover into the battery compartment. Press down gently on the battery cover until it snaps into place. NOTE: Remove the ear hook from the headset (see page 11) before - Vtech TL7600 | User Manual - Page 9
downward until the ON/OFF light on the headset turns on. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT191545). To obtain a replacement battery, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288 - Vtech TL7600 | User Manual - Page 10
of two headsets to each headset base. -OR• A compatible AT&T DECT cordless telephone (see page 7). You can register a maximum of two headsets to each cordless telephone. The telephone base recognizes and counts a headset the same as a handset. Refer to your telephone user's manual for the maximum - Vtech TL7600 | User Manual - Page 11
allow it to charge for at least five minutes before beginning registration. Remove the headset from the charger and replace the headset back into the charger. 3. On the headset base, press and hold the PAIR button until the MUTE light on the headset base turns on (about four seconds) and release the - Vtech TL7600 | User Manual - Page 12
it to charge for at least five minutes before beginning registration. Remove the headset from the charger and replace the headset back into the charger. 3. On the telephone base of the cordless phone, press and hold the HANDSET LOCATOR button until the IN USE light comes on (about four seconds) and - Vtech TL7600 | User Manual - Page 13
the headset to adjust the listening volume when on a call. MUTE/FLASH Press to mute the microphone during a call (page 22). Press and hold to receive call waiting during a call (page 20). Press to mute the ring tone in the earpiece when there is an incoming call. Battery - Vtech TL7600 | User Manual - Page 14
Over-the-ear hook To attach the ear hook to the headset: 1. Remove any headset attachment connected to the headset. 2. Insert the earpiece into the ear hook as shown in Figure 1. 3. Press the ear hook onto the earpiece as shown in Figure 2. 4. Hook the headset onto the desired ear. Adjust the - Vtech TL7600 | User Manual - Page 15
attachments Over-the-ear hook To adjust the headset to wear on the left or right ear: 1. Hold the headset in your hand. Lift the hook upward as shown in Figure 1. 2. Twist the hook 180˚ �(�c�o�u�n�te��r�c�l�o�c�k�w�is�e a�s�s�h��o�w��n��in� F�i�g�u�r�e�� 2��.� 3. Push the hook downward as shown - Vtech TL7600 | User Manual - Page 16
Getting started Headset attachments Over-the-ear hook To remove the ear hook from the headset: Hold the headset with one hand and the ear hook with the other hand. Lift the ear hook up until it separates from the earpiece. 11 - Vtech TL7600 | User Manual - Page 17
to the headband for wearing on the left or right ear: 1. Remove any headset attachment currently connected to the headset. 2. Insert the earpiece into the headband ring as shown in Figure 1. 3. Push the earpiece towards the headband ring until it clicks into place as shown - Vtech TL7600 | User Manual - Page 18
Getting started Headset attachments Over-the-headband To remove the headset from the headband: Hold the headset with one hand and the headband ring with the other hand. Twist and pull the headset until it separates from the ring of the headband. 13 - Vtech TL7600 | User Manual - Page 19
the ring into the small socket at the end of the left arm of the neckband To attach the headset to the neckband for wearing on the left or right ear: 1. Remove any headset attachment currently connected to the headset. 2. Insert the earpiece into the neckband ring as shown in Figure 2. Figure 2 14 - Vtech TL7600 | User Manual - Page 20
towards the neckband ring until it clicks into place as shown in Figure 3. 4. Place the neckband around your neck and over your ears. 5. Adjust and rotate the angle of the headset until the microphone is pointing toward your mouth as shown in Figure 4. Figure 3 Figure 4 NOTE: Firmly grip the - Vtech TL7600 | User Manual - Page 21
Getting started Headset attachments Behind-the-neckband To remove the headset from the ring of the neckband: Hold the headset with one hand and the neckband ring with the other hand. Twist and pull the headset until it separates from the ring of the neckband. 16 - Vtech TL7600 | User Manual - Page 22
, see the user's manual for your headset base model TL7610/TL7611 for additional instructions. Visit www.telephones.att.com to view or download the user manuals. If you registered the expansion headset to an AT&T DECT cordless telephone: 1. Follow the instructions in your telephone user's manual for - Vtech TL7600 | User Manual - Page 23
operation Answering a call on the headset Press ON/OFF on the headset. Ending a call on the headset Press ON/OFF on the headset. Auto off A call ends automatically when you put the headset in the headset charger. NOTE: The headset does not have an external ringer. When you receive calls, the - Vtech TL7600 | User Manual - Page 24
incoming call. Pressing MUTE/FLASH on one headset will only silence the ring tone of that particular headset. Intercom and intercom call transfer If you have registered your headset to an AT&T DECT cordless telephone, follow the instructions in your telephone user's manual for intercom and intercom - Vtech TL7600 | User Manual - Page 25
you subscribe to call waiting service offered by your telephone service provider, you hear a beep if there is an incoming call while you are already on a call. • If you have registered the TL7600 to a headset base and chosen installation option 3 from the TL7610/TL7611 user's manual, you must answer - Vtech TL7600 | User Manual - Page 26
call, press ON/OFF on the headset, then hang up the cordless handset. • To switch from a headset to a cordless handset while on a call, press the button you use to answer a call, then press ON/OFF on the headset. If you have registered the TL7600 to a TL7610/ TL7611 headset base that is connected to - Vtech TL7600 | User Manual - Page 27
, but the caller is not able to hear you. To mute the call: • Press MUTE/FLASH on the headset to turn off the headset microphone. When mute is on, there is a short beep every 15 seconds until mute is turned off. To un-mute the call: • Press MUTE/FLASH on the headset again and resume speaking. 22 - Vtech TL7600 | User Manual - Page 28
is not registered and the headset ON/OFF button was pressed. • The headset has gone out of range from the headset base during a call. 1 short beep every 20 seconds. Low battery warning. 1 short beep every 15 seconds. The call is muted. 1 long beep repeated. Call waiting alert tone. 1 short - Vtech TL7600 | User Manual - Page 29
1. • Orange light for headset 2. ON/OFF light status On • Headset is charging in the headset charger. • Headset is trying to register to the headset base or telephone base. • Headset is searching for the headset base. Flash • Flashes slowly when incorrect battery is installed. • Flashes - Vtech TL7600 | User Manual - Page 30
through all the instructions before beginning the de-registration process. To de-register all headsets from the headset base This procedure de-registers all the items registered to the headset base. 1. Press and hold PAIR on the headset base until the MUTE light on the headset base turns on - Vtech TL7600 | User Manual - Page 31
headset(s) and handset(s) registered to the cordless phone. 1. Press and hold � HANDSET LOCATOR �o�n��th��e��te��le�p��h�o�n�e��b�a��s�e�o��f the cordless phone until the IN USE light on the telephone base turns on and starts to flash (at least 10 seconds), then release the HANDSET LOCATOR button - Vtech TL7600 | User Manual - Page 32
. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless headset and headset base or charger to reset. • You may need a new battery. Please refer to page 4 of this user's manual. I cannot get a dial tone. • First, try all the suggestions above. • Move the - Vtech TL7600 | User Manual - Page 33
Maintenance and Troubleshooting Troubleshooting • If the previous suggestions do not work, disconnect the headset or telephone base from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your - Vtech TL7600 | User Manual - Page 34
. • If you registered the expansion headset to a headset base, try adjusting the speaking volume setting on the headset base. See the volume section of the user's manual for your headset base model TL7610/ TL7611 for additional troubleshooting. Visit www.telephones.att.com to view or download the - Vtech TL7600 | User Manual - Page 35
and Troubleshooting Troubleshooting My cordless headset isn't performing normally. • Make sure the power cord is securely plugged into the headset base or charger. Plug the unit into a different, working electrical outlet not controlled by a wall switch. • Move the cordless headset closer - Vtech TL7600 | User Manual - Page 36
not come on, refer to The ON/OFF light on the headset is off while charging in this Troubleshooting guide. • Charge the battery in the cordless headset for at least 6 hours. For optimum daily performance, return the cordless headset to the headset or charger when not in use. • You may need a new - Vtech TL7600 | User Manual - Page 37
. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. • You may be able to improve the performance of your cordless headset by installing your new headset base farther from any other existing - Vtech TL7600 | User Manual - Page 38
and Troubleshooting Troubleshooting • Relocate your headset or telephone base to a higher location. You may experience better reception by elevating the headset or telephone base. • If the other phones in your home are having the same problem, the problem is in your wiring or local service - Vtech TL7600 | User Manual - Page 39
Troubleshooting • Test a working phone at the phone jack. If another phone has the same problem, the problem is the phone jack, wiring or service. Contact your local telephone company (charges may apply). • Other electronic products can cause interference with your cordless headset - Vtech TL7600 | User Manual - Page 40
a different surge protector. • Relocate your headset or telephone base to a higher location. You may experience better reception by elevating the base. • If the other phones in your home are having the same problem, the problem is in your wiring or local service. Contact your local telephone company - Vtech TL7600 | User Manual - Page 41
Maintenance and Troubleshooting Troubleshooting The ON/OFF light on the headset is off while charging. • Make sure the power and line cords are plugged in correctly and securely. • Make sure that the battery connector is securely plugged into the cordless headset. • Push the headset downwards in - Vtech TL7600 | User Manual - Page 42
Maintenance and Troubleshooting Troubleshooting I cannot register the headset. For registration to a cordless telephone: • You must be using a compatible AT&T DECT 6.0 cordless telephone. Visit www.telephones.att.com for a list of compatible telephones. • Your cordless telephone has a maximum - Vtech TL7600 | User Manual - Page 43
Wait a few minutes. • Connect power to everything you unplugged. • Re-install the battery, and place the cordless headset into the headset base or charger. • Wait for the cordless headset to re-establish its connection with the headset or telephone base. Allow up to one minute for this to take place - Vtech TL7600 | User Manual - Page 44
Troubleshooting Important safety information This symbol is to alert you to important operating or servicing instructions that may appear in this user's manual , but use a headset away from the area where gas is leaking. If this product is a cordless model, make sure the headset base is also away - Vtech TL7600 | User Manual - Page 45
Troubleshooting Important safety information • Replace batteries only as described in your user's manual. Do not burn or puncture batteries att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Especially about cordless headsets • Privacy: The same features that make a cordless headset - Vtech TL7600 | User Manual - Page 46
. • Change this product's batteries only in accordance with the instructions and limitations specified in this manual. • As with any batteries, do not allow conductive materials such as rings, bracelets, or keys to come in contact with the metallic parts of the battery. The battery or conductor may - Vtech TL7600 | User Manual - Page 47
between the battery and metallic contacts. • Do not disassemble your telephone. There are no userserviceable parts inside. Refer to qualified service personnel for servicing. Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless telephones - Vtech TL7600 | User Manual - Page 48
Maintenance and Troubleshooting Maintenance Taking care of your headset • Your cordless headset contains sophisticated electronic parts, so it must be treated with care. • Avoid rough treatment. • Place the headset down gently. Save the original packing materials to protect your headset if you ever - Vtech TL7600 | User Manual - Page 49
compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user's manual be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone - Vtech TL7600 | User Manual - Page 50
service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers - Vtech TL7600 | User Manual - Page 51
Appendix A FCC Part 68 and ACTA Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept - Vtech TL7600 | User Manual - Page 52
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is - Vtech TL7600 | User Manual - Page 53
. This product has been tested and found to comply with the FCC criteria. The headset may be safely held against the ear of the user. The headset base shall be installed and used such that parts of the user's body other than the hands are maintained at a distance of approximately 20 cm (8 inches - Vtech TL7600 | User Manual - Page 54
that the product and all accessories provided in the sales package ("PRODUCT") are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the PRODUCT operating instructions. This limited warranty extends - Vtech TL7600 | User Manual - Page 55
to the extent that the problem is caused by use with non-AT&T accessories; or • PRODUCT whose warranty/quality stickers, PRODUCT serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or • PRODUCT purchased, used, serviced, or shipped for repair from - Vtech TL7600 | User Manual - Page 56
the unit. 5. How do you get warranty service? To obtain warranty service in the United States of America, visit www.telephones.att.com or call 1 (800) 222-3111. In Canada, call 1 (866) 288-4268. NOTE: Before calling for service, please review the user's manual; a check of the PRODUCT controls and - Vtech TL7600 | User Manual - Page 57
Appendix C Limited warranty 7. Other limitations This warranty is the complete and exclusive agreement between you and the manufacturer of this AT&T branded PRODUCT. It supersedes all other written or oral communications related to this PRODUCT. The manufacturer provides no other warranties for this - Vtech TL7600 | User Manual - Page 58
Headset voltage Charger voltage (AC adapter output) Replacement battery 1921.536 MHz - 1928.448 MHz 5 32°F - 122°F 0°C - 50°C 3.2 - 4.2 VDC 6VDC @200mA 3.7V 240mAH Operating range This cordless headset and clarity The TL7600/TL7610/TL7611 are fully cordless DECT 6.0 headsets offering a range of - Vtech TL7600 | User Manual - Page 59
calls, 18 Auto off, 18 B Battery charging, 4 Battery installation, 3 C Call waiting, 20 D De-registration, 25 DSL, 1, 32 E Ear hook headset attachment, 9-11 Ending calls, 18 F Flash (switch hook flash), 20 H Headband headset attachment, 12-13 Headset buttons, 8 Headset operation, 17 I Incoming calls - Vtech TL7600 | User Manual - Page 60
Index Index T Technical specifications, 53 Temporary ring tone silencing, 19 Troubleshooting, 27-38 V Volume controls, 20 W Warranty, 49-52 55 - Vtech TL7600 | User Manual - Page 61
www.telephones.att.com © 2008 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China. Issue 5 AT&T 12/08.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
 |
 |
User’s manual
TL7600
DECT 6.0 expansion headset