Vtech TL7600 User Manual - Page 9
Battery charging
View all Vtech TL7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting started Battery charging After installing the battery, charge the headset by placing it in the headset charger as shown below. Before registration, the headset ON/OFF light flashes twice every five seconds whether the headset is charging or not. After registration, the headset ON/OFF light is on when the headset is charging. Insert Push ON/OFF light 1. Insert the headset into the charging cradle. 2. Push the headset downward until the ON/OFF light on the headset turns on. IMPORTANT INFORMATION Use only the supplied rechargeable battery or replacement battery (model BT191545). To obtain a replacement battery, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
4
Getting started
Battery charging
After installing the battery, charge the headset by placing it in
the headset charger as shown below. Before registration, the
headset
ON/OFF
light flashes twice every five seconds whether
the headset is charging or not. After registration, the headset
ON/OFF
light is on when the headset is charging.
1. Insert the headset into the
charging cradle.
2. Push the headset downward
until the
ON/OFF
light on the
headset turns on.
Insert
Push
ON/OFF
light
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT191545). To obtain a replacement battery, visit our website at
www.telephones.att.com
or call
1 (800) 222-3111
. In
Canada, dial
1 (866) 288-4268
.