Vtech t2406 User Manual - Page 6

Handset Features IN USE/LOW BATT PHONE/FLASH KEY OFF KEY TONE/* KEY MEM/PROG KEY CHAN KEY REDIAL/PAUSE KEY VOLUME CONTROL IN USE/LOW BATT LED • The IN USE/LOW BATT LED lights when the Handset is on an active call. • It flashes in cadence with an incoming ring. • It flashes quickly during programming mode. • It flashes slowly when battery is low. PHONE / FLASH KEY • Press the PHONE key to make a call. • If you are currently on a call, pressing PHONE flashes the line. This would be used with call waiting to answer your second call. REDIAL / PAUSE KEY • When you hear the dial tone, pressing the REDIAL key will dial out the last number that was called on your phone. • It can also be used to store the last number dialed into the speed dial memory. See Storing a Redial Number into Speed Dial for details. • You can store a PAUSE into your dialing number. See Storing Pauses in Memory for details. TONE/ * KEY • In PULSE dialing mode, this key is used to switch to Temporary TONE dialing mode. VOLUME CONTROL • Adjust the volume of what you hear through the Handset. • While on a call, press the or key to adjust the listening volume. The Handset will emit a double beep when the maximum or minimum volume level has been reached. OFF KEY • Press the OFF key to exit all modes of operation. CHAN KEY • Pressing the CHAN key when the Handset is in use will activate a channel change to the next free channel. • This is used if you are experiencing noise or interference on the current channel. MEM / PROG KEY • Press the MEM key to enter memory mode. • The sequence for dialing a speed dial number in memory is: PHONE, MEM, Number Button (0-9). • Press PROG key to enter programming mode. 6