Weber Genesis 1 LP Owner Manual - Page 7
Assembly
View all Weber Genesis 1 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Tools needed Screwdriver Phillips screwdriver Hammer Step 1 Check package contents Cooking box (assembly) 7/16 inch open-end or an adjustable wrench Pliers Lid (assembly) ® ® Block of wood Supplies needed Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.") You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.") Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long. LP tank LP tank filler adapter While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071 to receive immediate assistance. Have your owner's manual and serial number of the barbecue available for reference. Bottom tray Two cooking grates Control panel 7