Weber Genesis 1500 LX Owner Manual - Page 10
Assembly, Tools needed, Supplies needed, Check package contents
View all Weber Genesis 1500 LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Assembly Tools needed Screwdrivers, regular and Phillips Hammer One 7/16 inch, 11/16, and 3/4 inch or two adjustable wrenches Pliers Tape Measure Pencil Electric drill Step 1 Check package contents Cooking box (assembly) Lid (assembly) ® ® Bottom tray Control panel Supplies needed You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.") Note - The hardware size of nuts, bolts, and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long. While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071 to receive immediate assistance. Have your owner's manual and serial number of the barbecue available for reference. Work table Gas supply line (with the flare fitting loosely attached for shipping purposes) 10