Weber Genesis 1500 NG Owner Manual - Page 21
Add base panel, Install side panels
View all Weber Genesis 1500 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Step 14 Add base panel You will need: Base panel. Put the right side in and down, tilt and set the left side in place. Figure 23. Step 15 Install side panels You will need: two side panels, and eight plastic buttons. From the inside of the frame assembly, set the left side panel in place between the side frame legs. Notice that there are two sets of holes in each side panel. Align the holes in the side panel to match the holes in the left side frame legs. Push in the four plastic buttons. Figure 24 (a). Repeat with the right side panel. Base panel Figure 23 top Left side panel bottom (a) Right side panel Figure 24 21
21
Figure 23
Figure 24
(a)
Base panel
Left side
panel
top
bottom
Right side
panel
Step 14
Add base panel
You will need: Base panel.
Put the right side in and down, tilt and set the left side in
place. Figure 23.
Step 15
Install side panels
You will need: two side panels, and eight plastic buttons.
From the inside of the frame assembly, set the left side
panel in place between the side frame legs.
Notice that there are two sets of holes in each side
panel. Align the holes in the side panel to match the
holes in the left side frame legs. Push in the four plastic
buttons. Figure 24 (a).
Repeat with the right side panel.