Weber Genesis 2000 LP Owner Manual - Page 25
Unlatch the Spider Stopper Guards and remove.
View all Weber Genesis 2000 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
d) Unlatch the Spider Stopper Guards and remove. Figure 7. g) Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 10. Remove the burners from the cooking box. Crossover tube Figure 7 e) Remove the manifold bracket and unscrew the two thumb screws that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 8. View from behind cooking box Figure 10 h) To reinstall burners, reverse steps c) through g). i) Reinstall the Spider Stopper Guards. Slightly rotate the Spider Stopper Guards so that the seams are in line with the Venturi fins. There should be no gaps in the seams or in the fit around the burners and valves. Figure 11. Thumb screws Figure 8 f) Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 9. Guide screw Figure 9 Venturi fin Check fit around valve Check fit around burner Figure 11 CAUTION: If the Spider Stopper Guards do not fit tightly, contact your dealer. CAUTION: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the barbecue. (See Step "Check for gas leaks".) 25