Weider 125 English Manual - Page 6

3. Be sure that the Uprights (1) are oriented as 3 shown; the high side of the weight rests must be on the side indicated. Attach the Frame (2) to the Crossbar (3) with two M8 x 55mm Bolts (14), 1 two M8 Washers (12), and two M8 Nylon Locknuts (13). Do not tighten the Locknut yet. 13 2 4. Tap a 30mm Square Inner Cap (22) into each end 4 of the Leg Lever (4). Tap a 25mm Round Inner Cap (24) into the indi- cated end of the weight tube. Tap the 1" Angled Round Cap (20) onto the other end of the weight 22 tube. High Side of Weight Rests 1 12 14 12 13 3 4 20 5. Lubricate the M10 x 60mm Bolt (18). Attach the Leg Lever (4) to the Frame (2) with the Bolt and the M10 Nylon Locknut (19). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 24 Weight 22 Tube 5 18 Lubricate 2 19 4 6. Tap two 19mm Round Inner Caps (9) into each 6 Pad Tube (10). Insert the Pad Tubes into the holes in the Leg Lever (4). Slide two Foam Pads (23) onto each Pad Tube. 23 4 9 10 9 23 10 6