Weider 7500 Uk Manual - Page 13

Arm Assembly 15. Attach the Butterfly Frame Brace (6) to the Right Upright (2) with two M8 x 80mm Bolts (100), two M8 Washers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. Attach the Butterfly Frame (5) to the Right Top Frame (4) and the Butterfly Frame Brace (6) with two M8 x 80mm Bolts (100), an M10 x 75mm Button Screw (118), two M8 Washers (103), and two M8 Nylon Locknuts (78). Tighten the M8 Nylon Locknuts (78) used in this step. 15 5 118 100 103 103 78 100 4 6 100 78 103 2 16. Apply grease to the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly Frame (5) with an M10 x 82mm Bolt (84) and an M10 Nylon Locknut (77). Repeat this step for the Right Butterfly Bracket (29). 16 84 Grease 29 Grease 5 77 Grease 84 Grease 28 17. Remove the indicated Butterfly Arm Cap (43) from the Right Butterfly Arm (26). Attach a Butterfly Handle (27) to the Butterfly Arm with an M10 x 65mm Button Bolt (106), two M10 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). 17 27 Grease 77 Attach the Butterfly Arm Cap (43) to the Right 106 77 Butterfly Arm (26) with an M10 x 82mm Button Screw (92) and an M10 Large Washer (105). Repeat this step for the Left Butterfly Arm (25) and the other Butterfly Handle (27). 80 80 82 44 29 109 25 26 Apply grease in the locations shown and attach 105 43 27 the Right Butterfly Arm (26) to the Right 92 Butterfly Bracket (29) with an M10 x 75mm Bolt (82) and an M10 Nylon Locknut (77). Press a Bolt Cap (44) onto the end of the Bolt. Do not overtighten the Bolt; the Butterfly Arm must be able to pivot freely. Repeat this step for the Left Butterfly Arm (25). 13