Weider 7500 Uk Manual - Page 24

54. Wrap the Leg Lever Cable (51) around a "V"- 54 pulley (47). Attach the Pulley to the Right Upright (2) with an M10 x 68mm Bolt (85), two Half Guards (55), an M10 Washer (80), a Long Cable Trap (57), and an M10 Nylon Locknut (77). Make sure the Cable Trap and Half Guards are oriented as shown. 55. Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley and a Cable Trap 55 (56) to the Left Press Arm (15) with an M10 x 50mm Bolt (97), two Half Guards (55), an M10 Washer (80), and an M10 Nylon Locknut (77). Make sure the Cable Trap and Half Guards are oriented as shown. 56. Remove the indicated M10 Nylon Locknut (77). 56 Attach the Leg Lever Cable (51) to the Right Upright (2) with the M10 x 120mm Bolt (115), an M10 Washer (80), a 7mm Spacer (111), and the M10 Nylon Locknut. Seat Assembly 57 57. Attach a Backrest (31) to the Right Backrest Frame (7) with two M6 x 16mm Screws (88), an M6 x 32mm Screw (89), and an M6 Washer (114). Insert the Right Backrest Frame (7) into the Right Upright (2) and tighten a Backrest 31 Adjustment Knob (53) into the Upright. Make sure the Adjustment Knob passes through one of the holes in the Backrest Frame. Repeat this step for the Left Backrest Frame (3, not shown). 24 2 55 57 47 77 80 51 55 85 97 51 55 15 80 48 55 56 77 2 115 80 111 51 77 2 88 53 7 114 89