Weider Club 16.8st English Manual - Page 11

Cable Assembly 15 15. Open the parts bags labeled ÒCABLE ASSEMBLYÓ and Ò4 PULLEYS.Ó Refer to the Cable Diagram on page 21 as you assemble the cables. Identify the Leg Press Cable (76) by referring to page 21. Attach the Leg Press Cable to the indicated hole in the Leg Press Base (84) with a 3/8Ó x 3Ó Bolt (45), two 3/8Ó Flat Washers (55), a 5/8Ó x 1/4Ó Bushing (90), and a 3/8Ó Nylon Jam Nut (63). 55 45 16. Wrap the Leg Press Cable (76) up around a 4Ó Pulley 16 (35). Attach the Pulley and a Cable Trap (44) to the Rear Press Upright (97) with a 3/8Ó x 3 3/4Ó Bolt (92), a 3/8Ó Flat Washer (55), and a 3/8Ó Nylon Locknut (50). Be sure that the Cable (76) is routed in the direction shown, and that the Cable Trap (44) is positioned to hold the Cable in the pulley groove. 63 90 55 76 84 92 35 44 76 55 50 97 17. Wrap the Leg Press Cable (76) under a 4Ó Pulley 17 (35). Attach the Pulley and a Cable Trap (44) to the Leg Press Base (84) with a 3/8Ó x 3 3/4Ó Bolt (92), a 3/8Ó Flat Washer (55), and a 3/8Ó Nylon Locknut (50). Be sure that the Cable (76) is routed in the direc- tion shown, and that the Cable Trap (44)is posi- 84 tioned to hold the Cable in the pulley groove. 18. Wrap the Leg Press Cable (76) around a 4Ó Pulley (35). Attach the Pulley and a Cable Trap (44) to the 3/8Ó x 5Ó Carriage Bolt (82) in the Stabilizer (5) with a 3/8Ó Nylon Locknut (50). Be sure that the Cable (76) is routed in the direction shown, and that the Cable Trap (44)is positioned to hold the Cable in the pulley groove. 50 55 18 50 35 44 76 82 5 92 35 44 76 11