Weider Pro 240 Bench English Manual - Page 8
Attach the Leg Lever 3 to the Front Leg 2
View all Weider Pro 240 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Attach the Bench Frame (1) to the center holes in the Crossbar (4) with two M10 x 84mm Bolts (43) and two M10 Nylon Locknuts (48). Tighten the M10 Nylon Locknuts (48) used in steps 1-5. 6. Attach the Weight Tube (16) to the Leg Lever (3) with an M8 x 58mm Bolt (42), two M8 Washers (47), a 10mm Spacer (30), and an M8 Nylon Locknut (51). Press a 25mm Round Angled Cap (34) onto the end of the Weight Tube. Lubricate an M10 x 72mm Bolt (21) with grease. Attach the Leg Lever (3) to the Front Leg (2) with the Bolt and an M10 Nylon Locknut (48). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 7. Attach the Backrest Tubes (12) to the Backrest Bracket (10) with four M8 x 43mm Bolts (27), four M8 Washers (47), and four M8 Nylon Locknuts (51). Do not tighten the Locknuts yet. 5 4 Center Holes 43 1 6 48 43 48 3 30 51 47 2 34 21 Lubricate 47 16 42 7 27 47 12 51 47 51 47 8. Insert the Backrest Bracket (10) into the slot in the Bench Frame (1). Lubricate an M10 x 172mm Bolt (41) with grease. Attach the Backrest Tubes (12) to the Bench Frame (1) with the Bolt and an M10 Nylon Locknut (48). Do not overtighten the Locknut; the Backrest Tubes must be able to pivot easily. 8 48 47 27 10 12 1 10 Lubricate 41 8