Weider Pro 440 English Manual - Page 7
Attach the Rear Stabilizer 3 to the Frame 1
 |
View all Weider Pro 440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Attach the Front Leg (4) to the Frame (1) with two M8 x 63mm Bolts (38), two M8 Curved Washers (33), and two M8 Locknuts (31). Do not tighten the Locknuts yet. 2 4 33 38 31 1 31 3. Orient the Rear Stabilizer (3) so that the warning decals are facing upward. 3 Attach the Rear Stabilizer (3) to the Frame (1) with two M10 x 43mm Carriage Bolts (40) and two M10 Locknuts (37). See step 1. Tighten the M10 Locknuts (37) and the M8 x 48mm Screw (47). See step 2. Tighten the M8 Locknuts (31). 4. Orient the Seat (18) as shown. 4 Attach the Seat (18) to the Frame (1) with four M6 x 25mm Screws (39). 37 1 Warning Decals 3 40 18 1 39 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
 |
 |
7
2.
Attach the Front Leg (4) to the Frame (1) with
two M8 x 63mm Bolts (38), two M8 Curved
Washers (33), and two M8 Locknuts (31).
Do
not tighten the Locknuts yet.
4.
Orient the Seat (18) as shown.
Attach the Seat (18) to the Frame (1) with four
M6 x 25mm Screws (39).
2
4
1
31
31
33
38
3
3.
Orient the Rear Stabilizer (3) so that the warn-
ing decals are facing upward.
Attach the Rear Stabilizer (3) to the Frame (1)
with two M10 x 43mm Carriage Bolts (40) and
two M10 Locknuts (37).
See step 1. Tighten the M10 Locknuts (37)
and the M8 x 48mm Screw (47).
See step 2. Tighten the M8 Locknuts (31).
4
1
18
39
1
3
Warning
Decals
37
40