Weider Pro 6900 English Manual - Page 18
Seat Assembly
View all Weider Pro 6900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
30. Thread an M12 Nut (84) all the way onto the 30 High Cable (55). Place a Large Washer (85) on top of the Weight Selector (24). Tighten the High Cable (55) into the Weight Selector (24) until all the slack is removed from the cables. Tighten the M12 Nut (84) against the Large Washer (85). 55 84 85 24 Seat Assembly 31 31. Attach the Backrest (16) to the Backrest Frame (61) with two M6 x 16mm Screws (62), an M6 x 32mm Screw (64), and an M6 Washer (82). 16 Insert the Backrest Frame (61) into the Upright (3) and tighten a Long Knob (91) into the Upright and one of the holes in the Backrest Frame. 91 61 62 82 64 3 32. Attach the Seat (15) to the Seat Frame (73) with two M6 x 16mm Screws (62), an M6 x 38mm 32 Screw (95), and an M6 Washer (82). 15 Insert the Seat Frame (73) into the Seat Tube (6) and tighten a Long Knob (91) into the Seat Tube and one of the holes in the Seat Frame. Wide End 73 9852 91 95 62 6 18