Weslo Cadence 1050 Uk Manual - Page 8
Caution
View all Weslo Cadence 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
DIAGRAM OF THE CONSOLE Displays Incline Control Speed Control Decal Key Clip Pulse Sensor CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power. • Always wear the clip (see the drawing above) whilst using the treadmill. When the key is re- moved from the console, the walking belt will stop. • Adjust the speed in small increments. • To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on the console. Use only a sealable water bottle. BATTERY INSTALLATION The console requires three "AA" 1.5 V batteries (included). Alkaline batteries are recommended. To install the batteries, open the battery cover as shown below. Press the batteries into the battery compartment, with the negative (-) ends of the batteries touching the springs. Close the battery cover, push up on the tab, and then push the tab forward as shown. Be sure that the tab locks into place. STEP-BY-STEP CONSOLE OPERATION If there is a thin sheet of plastic on the console, remove it. Battery Cover Next, step onto the foot grips of the treadmill. Find the clip attached to the key (see the drawing above), and slide the clip onto the waistband of your clothes. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key Tab is not pulled from the console, adjust the position of the clip as needed. Batteries Follow the steps on page 9 to operate the console. 8