Weslo Cadence 2300 English Manual - Page 5
Operation, Adjustment, Danger
View all Weslo Cadence 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OPERATION AND ADJUSTMENT GROUNDING INSTRUCTIONS This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug mustbeplugged into an appropriate outlet that is properly Installed and grounded in accordance with all local codes and ordinances. DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to determineif the outlet box cover is grounded before using an adapter. I Grounded Outlet Box 2 Grounded Outlet Box Grounding Plug • • • ° Grounding Pin Grounded Outlet ° Adapter Grounding Plug 0° • Lug Metal Screw Grounding Pin SIUCONE APPLICATION To maintain the low-friction quality of the walking belt and reduce treadmill wear, a non-oil, non-petroleum base sil- icone lubricant should be applied generotisly to the walking platform. (Silicone lubricant is available =• - at most hardware and automotive stores.) It is very. - important to apply silicone lubricant before initial use = : of the treadmill. Lubricant should also be applied after ' - every 10 hours of use or whenever a decrease in perfor- - mance is noticed. UNPLUG THE POWER CORD,-lift each side of the walking belt and apply the lubricant generously to the area indicated in the drawing. 5