Weslo Cadence 45 User Manual - Page 9
Attach the Storage Latch 38 to the Left Upright 32
View all Weslo Cadence 45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Set the Console (2) in the Console Base (45). Make sure that no wires are pinched. 8 Attach the Console (2) to the Console Base (45) with six 3/4" Screws (77). Start all six Screws before tightening them; do not overtighten the Screws. 9. Insert the excess Wire Harness (53) into the large hole in the side of the right Handrail (4) Securely tighten the 9 plastic tie on the bottom of the Console Base to pre- vent the Wire Harness from slipping. Then, cut off the end of the plastic tie. 2 45 77 77 4 Tie 53 10. Attach the Console Base (45) to the Handrails (4) (only one Handrail is shown) with four 3/4" Screws (77). Start all four Screws before tightening them; do not overtighten the Screws. 10 Large Hole 4 53 45 77 11. Attach the Storage Latch (38) to the Left Upright (32) with two 3/4" Screws (77). Do not overtighten the 11 Screws. 9 77 38 32